4 Heavy Duty Angle Shelf Brackets Floating Shelves Support Brackets, 6-Inch

The shelf brackets themselves are nice but the hardware is horrible. The anchors did not work whatsoever and it took probably 4 hours of trial and error with other hardware. We ended up having to use toggle bolts.

I found this product to work well and was fairly easy to install. The brackets are very thick and sturdy and look nice. You can use already cut shelving board or use raw wood and stain it. I used some fence boards I had laying around to match my farmhouse decor and just purchased screws to fit the thickness of the wood accordingly. Worked well!!!

As promised beautiful

Good quality. Id def buy again if I need some.

I used them for leg supports on a double river table with long thin legs.

Brackets are very sturdy. Bought them to put up some maple shelves I made for my bathroom. The drywall anchors were decent, however they came with wood screws for the drywall anchors which causes the screws to continue turning inside of them. The bottom of the bracket is flat so if it is used as shown in my photo the screws will not sit flush inside the bracket at the bottom. You will need a different type of screw head. But honestly no one is looking at the bottom of your bracket so I dont see an issue. The screws will sit flush in the wall. The brackets are not perfectly set at 90 degrees in various spots but will hug the wood nicely. If that matters to you, you might look else where. But i think it adds to the charm of handmade shelves. My wood is reclaimed and not perfect either. The brackets will hold my toilet paper from falling off the shelf. Which is exactly what I wanted.

Very heavy duty! We use for our hundreds of dvds on the edges to keep them all from falling off the edges. Love the look and they seem to be holding up very well!

Sturdy, look great, well built - no complaints! Will likely buy more in the future.

Love these and have purchased repeatedly

These are thick metal brackets. They wont bend, not the flimsy cheap ones.