6 Pieces Needle Roller Bearings One Way Bearing Small Octagonal Bearings Industrial Bearings 8mm Bore 14mm OD 12mm Width with Nice Load Carrying Capacity and Stiffness Bearing

Installed with no issue, except for the old bearing. It was stuck.

If your OCedar Spin Mop Bucket has trouble spinning or doesnt spin at all when you pump the pedal, this is is the likely fix if all the gear teeth are good. I have a spin mop bucket that has been in use daily for well over a year. At first it started slipping then quit spinning at all. I took it apart and discovered the one way bearing was very very rusty and had failed. These are an exact fit. Tapped out the old bearing with a small punch and gently tapped in the new one. Also, one end of the bearing is stamped with numbers or writing. That end goes up into the gear. Do not lubricate the inside of the bearing. you can use a little petroleum jelly on the outside to ease assembly. It now spins like the day I bought it. Since it came in a box of six, I should be good for at least the next six years!

Works perfectly to repair o-cedar spin mop. Works like original bearing. Easy to replace, just pay attention to the direction of the bearing, as this bearing is a “one way” bearing and has to be installed correctly to work properly. There is an arrow on the bearing face that denotes the direction it should spin

These save the day. I have an old spin mop that gets a lot of use and seems to fail every 18 months. After watching a few YouTube videos on how to fix it, I ordered these. Its nice that you get more than one, so you will have them the next time the mop fails! Thumbs up!

So like most my cedar spin mop stopped spinning. I was going to go out and buy a whole new set, but my husband insisted that we look for parts to replace the broken piece with. This is the perfect replacement, within a few mins my spin bucket was back to working perfectly if not better! It is easy to install, and you get extras if it happens again!

Perfect part, spin mop works like new with this bearing

They work great

These are great. They function as the product description explains. The product measurements are ACCURATE...Great Product

Bought to fix my spinning mop bucket. This was exactly what I needed. Thank you.

Replaced the bearing on my o’cedar mop and it works great just like before