ANTEC AX Series AX61 Elite, High-Airflow Mesh Front Panel, 4 x 120mm ARGB Fans Included, Tempered Glass Side Panels, Up to 8 Fans Simultaneously, 360mm Radiator Support, Mid-Tower ATX Gaming Case

This case looks better in person, the front panel looks great, its very roomy for cable management, you can install a 360mm cooler on top, i recommend you connect first all the top cables that go on the motherboard then install the cooler. Love the case (DP-503)

Love the design, great case

Disliked the panels that’s why I gave it a 3 stars

Does the job for a avid gamer.

Has more than enough space for you cables . Easy to build in. Fans are good as well just make sure you plug a 4 pin pwm fan to the first header on the fan controller. That way your fans can be controlled by your motherboard. Overall Im satisfied with it . Ill buy a another one for my next build.

Overall, its a really nice budget case. You can spend more and get thicker metal, smoother edges and better cable management but for the price this Antec case is a good deal. Enough space for larger GPUs and an NH-D15 cooler. Fans are quiet and have quite a few RGB adjustments built in. My son really liked the looks, in fact, i bought a second for my other son because he dropped his computer on the floor and busted up the front faceplate, Yeah, he knew i wasnt happy about that. But these days you cant hit your kids so you have to shame them publicly in front of their friends.

Un producto muy elegante y con la función de botón de led , increíble el material, espacio fácilmente una eatx y con soporte para la trajeta gráfica incluido, solamente que debe de ser de las grandes pero ya casi todos tienen ese tamaño , increíble muy buen producto

The case is actually great for the size and features. First, yes the materials are a bit thin and cheap, so not the premium feel and edges can be sharp, so careful when installing, but it does have the rubbery inserts to protect your cables from rubbing and getting damaged, so that is fantastic. The GPU bracket holding arm - is actually why I picked this case over a similar. With GPUs being huge and having sag issues, it is almost required to have something to help get to the front right corner of the GPU to keep it from sagging. This has an adjustable little arm with rubberized coating on the tip to keep from scratching (and reduce vibration noise from GPU through the arm) - and works great. Best of all it is rather discreet. looking more like a cable adapter than a sag-prevention system. The next obvious thing is the fans - they are RGB, they have a controller, and they work pretty well. They dont appear too loud or anything either, even pushing them to full speed. Are there better fans? Sure, but these essentially were free with the case, so, a huge bonus. (similar higher quality fans with RGB could easily be $15 each on the low end) My main reason for this case was the need for the ability to install a 360mm radiator on top. There are not many cases that allow this, and while installation was a bit tedious, the end results are pretty great. It was my first time using an AIO and radiator, and I tally up my fumbling to that over case design. The design of the case also allows for magnetic mounting antennae (like for Wifi/Bluetooth) to easily happen on top rear of the case, or even the (back) side if you needed. The pre-wiring wasnt fantastic, and there was not a ton of room behind the back side panel for wiring, but it is possible with a bit of time and a lot of cable ties. I am happy with it. I have had it for a few months of use now and honestly, just taking the time installing everything and figuring out wiring made it all come together. I shouldnt need to rewire anything for a long time, so that wont be another problem for some time. Top access USB will take some getting used to (and maybe some 90degree extensions, to prevent thumb drive damaging) - and I would consider getting some silicone USB and audio plugs if you dont use the ports often- as they will catch dust. The magnetic top filter I find rather useless, unless you turn your system off often. Mine forces air UP through it nearly all the time- so dust has no time to settle into the system, but if you had it off, maybe it would be of use? The front filter was easy to clean after a month of build up, although the shapes did require a bit more than a quick brushing to get in the crevices.

A very beautiful PC case that managed to fit my 240mm radiator as my other case simply did not fit. After setting up my case, eureka! It worked! But something was wrong, I smelled smoke! Was it the CPU? What did I do wrong, I took a gander and found out the sata power cable blew up, leaving a burn mark on my PC side case, luckily and thankfully, nothing short fried and all my pc part didnt break, maybe for that led hub, i made sure everything was corrected, and with fingers crossed, everything works! Had to change out my water cooler for my Old cpu cooler to hold me down, as for this case. Absolutely gorgeous, I would recommend it alot but the fact it almost blew my computer really gave it 3 stars, Im willing to update my progress as I will plan to do handy dandy work, and hopefully the 3.0 cable adapter I order will fit with this case, it did kind of bend both my usb 3.0 motherboard header. Not good. However, Im willing to give it a chance and do some elbow grease for this sexy bad boy. If all goes dandy, easily a 5 out of 5 star. But for now, 3 stars.

I want to start off by saying I really like this case. Its well built and includes a gpu bracket. The reason I purchased it was to accommodate aio coolers. This is the cool part. It will support a top mount 280 mm or 360 mm aio. The front also can support a 280 mm or 360 mm aio. If you want, you can mount a 360 mm aio on the bottom. Lets not forget the 120 mm aio on th back. There is also enough room for a RTX 4080, but nut a RTX 4090. Fine with me, I cant afford a 4090.