Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)

This was my first time using ABS like resin, so I expected a super strong odor and having to completely change my print settings and so on. I was surprised to find odor wise the smell is basically the same as the many other resins Ive used, not stronger or worse. Print wise i did have to adjust my exposure time slightly but so far 2 prints in and Ive gotten great results. post care is the same as any other resin.

Took forever to calibrate my printer to use this resin in the first place (I have an M3, and the suggested settings on the product page werent even remotely close to accurate), but then once I did get my calibration prints to turn out perfectly, so there shouldnt have been any problems, I still couldnt get any other prints to actually work, including prints that have been proven to work fine with other resins. The amount of time and effort wasted trying to get this stuff to work is absurd. Honestly, since this is the first non-basic Anycubic resin Ive tried, Im not sure Ill ever be buying any non-basic Anycubic resins in the future.

Habe kaum brauchbare Teile damit drucken können, trotz verschiedenster Anpassung der Parameter. Drucke ja schon ein paar Jahre, aber sowas habe ich noch nicht erlebt. Die weingen brauchbaren Teile ließen sich unglaublich schwer reinigen. Auch in der Waschbox setzte sich das Harz überall zu einer extrem klebrigen Masse ab, die sich kaum mit verschiedensten Lösemitteln entfernen ließen. Wie extrem zäher Kaugummi. Eine richtige Sauerei. Hat mich Tage gekostet, alles wieder sauber zu bekommen. Daher kann ich dieses Harz nicht empfehlen. Werde es entsorgen und nie wieder in die Nähe meines Druckers lassen.

This is without a doubt the worst resin I’ve ever used. Fails nearly every time and separates within about 1 hour of mixing. Will never purchase again.

This stuff prints so nicely. I used default print settings for my AnyCubic Photon S and had no problems at all. I think it even printed better than the sample resin I received with the printer. I am not sure if you can tell from my photo but the flat base of part is not only smooth but it has a gloss like quality to it. The cage portions of the print and the internal letter structure have an almost satin look. The finished product is farily flexible but still breaks if you go to far. Definitely more flexible than other resins I have used but I wouldn’t go so far as to call this a flexible resin. I would say it has about the same flexibility as ABS which is no surprise since this is ABS like resin. Post processing was simple. Quick wash in IPA followed by drying followed by UV cure. It isn’t the cheapest resin available but the $25 price tag is not terrible for a resin that is so easy to use. I highly recommend and will buy more in the future.

Quality resin that works perfectly on my Photon Mono X. I appreciate the other brands, but it just works when you buy resin made for your Anycubic printer. I used some of the community profiles on LycheeSlicer, and this resin was spot on. There is no chalky skin after curing, and the prints look amazing. This is a must-buy at least once for anyone with an Anycubic Resin Printer.

shatters really easy, prints smash like glass, tryed on many thikness and models, same results! buy cheeper non abs like for better results

Das Zeug stinkt zum Himmel. Wenn man es versucht, zu biegen, würde man nichteinmal ein Viertel von dem schaffen, was im Bild gezeigt wird und das Zeug zerbricht in tausend scharfe Teile, wie Glas. Ich habe ein paar unterschiedliche Teile damit gedruckt, keines davon hat gehalten. Bei der kleinsten Belastung gebrochen. Für Figürchen oder sowas vielleicht ganz gut, wenn man Funktionsteile drucken will, nicht zu empfehlen.

Definitely more durable than the basic resin I was using, thinner pieces are able to handle a bit more pressure but it does not flex before it breaks. It works great for any prints you need to stay rigid. Thin pieces might break but you pretty much have to purposely crunch them

This resin works well, I get good detail using both of my printers 2K Elegoo Mars and 4K Flashforge 8.9. However of all the resins I have tried this one smells so bad. I wont purchase again because of this.