













Buffing Polishing Pads, SPTA 5Pcs 6.5 Inch Face for 6 Inch 150mm Backing Plate Compound Buffing Sponge Pads Cutting Polishing Pad Kit For Car Buffer Polisher Compounding, Polishing and Waxing -SQMIX65
-
Dan
> 24 hourI used these pads with a 3 step paint polishing kit from 3M, I used them on a Porta-cable variable speed 6 random orbital sander, with a hook and loop system. I polished a heavily oxidized and scratched up 1999 ford ranger pick up. Oh, the diffrence is amazing, started it was old and dull, now shinny and lively looking paint. The pads held up very well, some signs of wear, but the pads did their job very well, the hook and loop held well, I only slung off one pad when I failed to switch off the buffer when it was not in contact with the paint job. They seem to me to be a very solid value, and should last long enough to polish more than a couple of cars.
-
goose
> 24 hourUsing these on motorcycle pain and was concerned about the hardness of the pads at first. Started using a less aggressive compound just in case and so far so good. Its also nice to have a box that they can all fit back into (rather than just plastic bags...
-
COP
> 24 hourlooks like they should work just fine
-
Ohio Guy
> 24 hourEnded up needing to sand the polyurethan on my table top, used these to polish the top back to a super high gloss and very smooth finish. Good product so far, only used it one time though.
-
victor alfredo vera
> 24 hourRecomiendo
-
Dale Oliver
> 24 hourI used them to polish my car andy wifes car.
-
Arlen
> 24 hourThese pads work extremely well when used in steps from course to ultra fine polishing. Just wash them when finished with soapy water and set them aside to dry and they are ready to use for your next polishing job.
-
Rob & Betsi Hilton
> 24 hourGreat product, reasonable price.
-
C7corvette
> 24 hourThe buffers worked great
-
Hagendazee
> 24 hourI have Griots G9, and a Flag Blue gel coat on my boat. These pads worked great. I paired these with Jescar Compound, Mirco polish and Power Lock. Used the Heavy cut + compound after 1500/2000 grit wet sanding some fender rash. I didnt have a rotary polisher, thought I was going to be SOL....but worked great. Ran the DA at 6...no problems. Used the light cut on the polish. Used to finish with the Power Lock. No Holos. No swirl. Best results Ive had so far.... NO problems with durability. The pads have a nice little cross cuts in them that hold the polish. Totally durable...will easily last me 2-3 more rounds of polishing, maybe more.