DC 12V Power Extension Cord, Hosafe 33ft White Security Camera Power Adapter Extension Cable, 5.5*2.1mm Power Cord Connector for Home Security Camera, Nvr, Router, Switch, Projector
-
Craig
> 24 hourEasy install
-
Marie
> 24 hourBought it for another camera, but returned it. So when I purchased my new camera I thought it would fit but it didnt. So I end up returning it. It was nicemlength and come with two extension cords.
-
Magdalena Moore
> 24 hourWorks great
-
Kevin o.
> 24 hourStraight forward, cut and dry, works as advertised, powers multiple units.
-
mike s.
> 24 hourA must have if you are using a security camera outside as most only come with a 3-4 ft cable.
-
LVSunny
> 24 hourThis was easy to install and the length doesnt change the quality of the picture during the day or nighttime hours.
-
James Nelson
> 24 hourworks great easy installation
-
Biscuit
> 24 hourI wish the power supply that comes with the camera had a long enough cord. The one that does come is too short to be useful without this extension. Kinda sucks having to buy it too. As far as operation, it seems to work as described. Time will tell.
-
John Pierce
> 24 hour2 cameras on each side of the house. Will be adding one out front and one on the back
-
Jesus
> 24 hourAs described
DC 12V Power Cord, Hosafe 33ft White Security Camera Power Adapter Extension Cable, 5.5 * 2.1mm Power Cord Connector
12V DC extension cord with 5.5x2.1mm male and female connector
This DC extension cable inner is made from the pure copper core, greatly reduces resistance, reduces voltage drop, ensures the device gets enough voltage as the original standard, its outside is made from insulating flame retardant PVC material, making sure the power cable is durable and bendable.
This 12V power cord is can work with all 5.5x2.1mm power cable connectors, and make the installation much easier.
Usually, the outdoor home security camera can work under a voltage range: 11.4~12.6V, when we add a single 33ft HOSAFE power extension cord, the voltage is from 12V to 11.8V, just drop a little, that will not affect the camera"s normal working.
When we add too many cables or use low quality cable, the voltage is from 12V to 9.7V, this is out of standard working volt range 11.4~12.6V, this may work in the daytime (IR led not work), but you can find the night vision is not bright/clear enough, and the camera will die in 3-6 months. So please make sure the volt output is in the device"s working range, do not damage the expensive device with a cheap power cord.
HOSAFE power extension cord could make the installation much easier, saving work, time, and money.