ELEGOO Building Plate for Mars 2 and Mars 2 Pro LCD 3D Printer with Anti-Slip Hexagon Socket Screws and Sandblasted Surface, Compatible with Mars 2 and Mars 2 Pro

Works just like it should! I love having a spare one around!

This plate has the sandblasted aluminum surface. I honestly can not tell a difference from the stock black painted.

Used it on the original Elegoo Mars (I have the silver one) and it fit perfect. Cleaned with some IPA out of the box, leveled and it worked flawless on the first print. Adhesion is a bit stronger that the original plate. The low profile knob keeps it from lifting the cover when prints are complete. Highly recommend if you need another build plate for your original Mars.

If you are trying to print a lot of Minis or small parts having extra build plates is the way to go. Yes you can buy another printer and spend $300 or spend $30 and get a second or in my case 3rd build plate. My printer never stops now once one build is done swap the plate home and level it and good to go turn over 10 min then take you time with the completed prints washing and curing.

Purchased this item to have as a backup and serve as a second build plate so that I could start a second print immediately after one was done and while I was post processing/cleaning the plate. Exact replacement part works as expected.

Unlike the original plate that comes with Mars 2 (PRO), this one has silver surface (sandblasted aluminum) that reflects and scatters light, making prints with clear resin impossible to print directly on the build plate. Printing with supports or with gray resin is no problem. This is definitely a downgrade coming from the original build plate that shipped with the MARS 2. I might have to look for a way to coat the build plate with dark non reflective color. Hard to image nobody in development team questioned making the build plate light reflective!? Massive letdown from Elegoo.

Already have one? This is the same one. Carry on.

I stuck a Wham Bam to my original plate and found that larger prints would be stronger than the magnetic force on the wham bam. I purchased this as a backup to have the original build plate again. no issues at all

Bought this a while back, and it looked exactly the same as the one on my system so I thought it was good. Went to put this on this morning, and discovered it doesnt slide onto the arm at all. Probably going to have to do some filing to get this to work. Hard to tell what exactly is not fitting, because they look identical by eye. Grrr.. UPDATE: I managed to file down the ridge inside the hole by about two tenths of a mm, and now it fits perfectly. Looks like a machining error is all, and Im back to printing!

Ive got a couple of these, and they seem to work out ok. This one was a little tight and took some work to actually fit so thats why I didnt give it 5 stars.