Epson Projector PowerLite Replacement Air Filter (V13H134A21)

Should be more clear that you are buying a case of 10 filters.

I ordered this filter at the same time I ordered a new bulb for my projector. However I didnt open either package until this past weekend because I didnt need to replace anything. When I went to replace the filter and opened the box, it was empty! Since I am past my return date I dont expect anyone to send me another one, and I will know next time to check EVERYTHING the instant I get it. So if anyone needs a box for their filter, I can hook you up. I just cleaned up the one I had and will keep using it for the time being.

A little pricey for some plastic and a paper filter, but its oem and it fits perfectly. Super easy to install.

Epson projector was shutting off due to thermal overload. Old filter was clean, but really old. ut this new one in and it helps quite a bit. Doesnt seem to overheat nearly as much. Ended up putting the projector in high altitude mode to crank of the fan speed as well just to be safe

I had no idea the last time my Epson HomeCinema 8350 filter was changed. With a dead bulb and a noisy fan, I thought it might be time. This is not OEM, but its quite hard to tell. Everything down to the texture on the fabric is identical to the original. Note: I tried to install it in the wrong direction at first. Pay close attention to the way you pull your old filter out!

No issues here. Look like an OK filter. ********************* FYI DO NOT buy a bulb for your projector on Amazon. (I was shopping for ELPLP49 / also known as V13H010L49) I cant find one that really is an Epson original. The last one that was bought on Amazon lasted about 430hrs then blew. It looked just like the original, but it clearly was not. For me an original bulb lasts about 1,500hrs. An original Epson bulb will have a small sparkly sticker on the box and the bulb itself that says its a genuine Epson product. So moral of the story is: buying a bulb on Amazon is a fail, but this filter was OK.

Great OEM quality but more economical than buying it from the manufacturer.

Works as intended…air filter for a projector

What can I say. Its a filter. It does its job and after a year, I replace it. Its OEM so you know it fits. Just a little expensive for what it is.

This filter was a breeze to install, no pun intended. I have my projector in the basement and there is a lot of dust and airborne crap so this is a must. Make this a yearly fix and you will be very surprised to see the amount of dust this collects. Another good bit of advice is to adjust your settings to High Altitude so the fan operates on a higher setting and keeps your bulbs cool. This will lead to larger build up on the filter, but that is why you change it out yearly.