Eureka / Sanitaire Upright Round Vacuum Belts 10 Pack

Simple easy install. Fit our church vacuum, with spares now for when they get chewed up. (and they do, no matter what brand you buy for this vac.)

No comment

These are great belts but you must install them properly with the twist a quarter turn in correct direction. Slightly Straddle the vacuum cleaner bag with the motor close to your body and the roller in front toward the wall twist the belt 1/4 turn to the left as you put it on the motor shaft. (You will already have the belt around the brush with the brush roller installed in it’s slots). There might be a YouTube available because if you don’t install it just right the belt will burn out. Make sure you remove the hair or debris WRAPPED AROUND BELT “GROOVE“ ON THE MOTOR SHAFT OR ELSE THE BELT WILL CONTINUE TO SLIP UNTIL IT BREAKS. Be careful and Do not scar the metal motor shaft with a sharp tool. I burnt up a lot of perfectly good belts until I did all this correctly.

The quality is good and they work.

n/a

Like, worked fine...

I replaced a broken belt in my cleaner and things worked out just fine. I now have nine spares should another one breaks. Im a little over stocked actually.

Fits my old vacuum from the 90s

They are not made by Eureka or they would have a model number molded on the outside edge of the belt. It went on pretty easy but has not been given the rug test yet. Hopefully they will last awhile. For six dollars and change for ten belts it seemed like a pretty good deal. If they last a couple of months thats almost two years.

I have a 40 years old Eureka upright vacuum that I had difficulty finding replacement drive belts. I found these belts in Amazon.com and they fit and work for my vacuum. Very happy with my purchase. It appears the 10 belts I received were part of a bulk lot and the belts arrived in a brown vanilla envelope.