eXtremeRate Textured Green HOPE Programable Remap Kit for Xbox Series X/S Controller, Upgrade Boards & Redesigned Back Shell & Side Rails & Back Buttons for Xbox Core Controller

Had trouble at first but works great now…Installer error. The first time I Soldered, all of led’s on the test board lit up, indicating that all solder points were good. After putting it back together and using the controller, my R3 wasn’t mapping. So I took it back apart and retested it, and sure enough R3 and TP 15 we’re not lit up on the test board. So if anything isn’t mapping retest and fix solder points.

At best, Im a novice at soldering. My experience is limited to very basic wire on wire stuff maybe 4-5 times in my life. I have the cheap Amazon recommended soldering pen kit and a steady hand. This was pretty easy. It took around 2 hours and a couple moments of frustration but when I was done, I had perfect solder beads and solid points. When I tried the tester, every light illuminated flawlessly and when I tested my controller in a gamepad testing program, it worked flawlessly. HOWEVER, WATCH TUTORIALS. If you watch the companys official tutorial, check the comments first. They tell you to use the wrong screws early on and correct it in the comments. If you use these screws for the button brackets, they will push out little bumps of the plastic on the back of the controller when tightened because theyre longer than the screws youre intended to use. Other than that, I recommend using flux or at least flux core solder for a MUCH easier install. My strategy was actually cutting little bits of solder, using tweezers to position them on the circuitry test points and get a nice bead formed, then hold it down with tweezers onto the board TP and solder it to the board. My solder didnt want to bead and separate and instead just beaded up onto the wire instead of coming off onto the solder points on the circuitry. (Probably because I was using a super fine soldering tip). So cutting it with a razor and tweezering the perfect amount of solder onto the points was easier and resulted in perfect solder beads, for me at least. Just dont use too much solder, it truly doesnt take much. All in all, this was incredibly fun to do and in my opinion, totally worth it if youre at least sort of experienced with soldering. I just wish I had pictures from midway through or after soldering because I was very proud of my soldering job.

Some of the kit parts are easy to install and the soldiering wasnt to bad but the quality of those lofty fpc2 melted as soon as I touched the soldering iron to it. I had 1 soldier connection that I never could get it to connect. So I just taped it down and put the controller back together and it works great. Hopefully will stay working. And yes I took a couple soldiering courses and got a certificate for a soldering technician so I know how to solder.

I purchased this after my scuff prestige paddles broke for the 5th time, and I could no longer purchase replacement paddles online. The price seemed like a no brainer as I could do the soldering work, and had old controllers lying around. If you dont know how to solder this isnt for you, but if you do, or are willing to learn, its worth it. As for the installation, it was easy and straight forward. The one complaint I had was that I think there must have been an issue with my test board. When I finished I only had 2 lights come on, however after rechecking multiple times my solder joints were secure, so I said forget it Im testing the controller and put it all together. Low and behold every feature works fine. It was a frustrating point that it had me chasing ghost to try to figure out what the problem was, but the satisfaction of being able to say you did it yourself outweighs any of it. As far as use goes, the controller itself is very slick. It gets slippery when picking up and setting down the controller repeatedly (ie watching YouTube, twitch, etc), however when you are gaming you dont notice any issues. Can always just use a random casual controller when doing casual things. This isnt a big issue however, must nitpicking every possible thing I could think a downside would be. If this was a concern I would say buy the textured one? The buttons feel very clicky and responsive. I love the feel of them. They are much nicer to use then any paddles Ive tested. Ive got pretty big hands, and have no issue with button positioning and being able to use them all without compromise. Another big plus about the feel, which I initially worried might had been a thing, was the fitment. Alot of aftermarket diy kits, as in many fields, have an issue with fitment being seamless. This is just that though. I have no issues with seams or loose pieces. The build quality is top notch as well. All in all a great product that I enjoy using more than my past scuff controller or elites.

Used the test board after soldering and it would only light up 5-6 of them. So I resoldered the other points twice and tested it again and none of them lit up. When I pressed a soldered point, that point would light up. Im guessing the test board was faulty because after I assembled it, I was able to remap the sticks and the face buttons just fine. I really like the mod and theyre not as loud as the ps4 remap kit and shell from extremerate. Those were really loud. This mod would be better if the k3 and k4 buttons were as small as the top buttons. I removed the bottom ones as I like gripping it tightly and the bigger buttons got in the way. Also the back is a downgrade compared to the textured back on the original which gave more grip. I really dislike the soft shell as hand oils will go on them overtime and cause the color to fade

TL;DR - Get it if you know how to solder and want back buttons I installed three kits from extremerate, all for the Xbox Series S controller. These kits were the hope remappable buttons, the flexor trigger stops, and the soft touch controller shell. During my time installing it I had two kids running around the kitchen table that didnt seem to understand I had a hot iron and needed a stable enviroment to solder the more than 20 connection points. After sending them with their grandma to go to the beach, I was able to continue and it didnt really get easier. That said I have soldered much worse, namily a trace line on an OG Xbox board, but this was up there as all the points on the board didnt line up perfectly. This could have been mitigated by using some tape, but Im lazy. Thank you to extremerate for including a test board that allowed me to see the missing connection point that I seemed to have overlooked. I would have been pretty annoyed with myself if I got everything together and had to find out by myself if everything worked as intended. Once I got the controller together it worked great. The buttons have a nice tactile feedback that simulate the clicky feel and sound youd get from a mechanical keyboard. Setting the buttons on the back is fairly easier, though not as easy as something like the Elite or 8bitdo controllers. That said this is a mod and not a full controller, so all is forgiven. All in all, its a great product. I would highly recommend it to those with soldering experience who want to add programmable buttons to a stock controller. They arent as quality as something like the Elite controller, but if you have a stock controller that isnt being used go ahead and throw these on it.

The kit works perfect, it has installed alongside with the led kit without problems, the battery consumption is great. For me the upper buttons are a little difficult to press without readjust the hands ingame. The white of the shell is whiter than the blue xbox core controller. There is not textured grip

If you know a little soldering and know how to follow instructions it should be easy for you.

easy to install if you take your time. buttons are nice but soft white gets discolored to white almost immediately.

Performance wise the kit is amazing, the buttons are really responsive, feel tactile and smooth. Never had a problem while playing games like Elden Ring/Bloodborne. But looks wise, this is how the backplate looks after a lil less than a month of use, although I hear this is only a problem with the white parts, it started to yellow very fast which is very sad because I was going for an almost white controller. 3/5 probably a 4.5/5 if I got any other color.