EZtar Reflective Tape, 2 × 12 × 10 PCS Red & Silver High Intensity Self Adhesive Waterproof Trailer Outdoor Safety Caution Reflector for Cars, Trucks, Trailers, Boats, Road Signs

I am hoping these will stop our mailbox from being hit and I applied to the front of the gate as well. The tape itself is strong and the adhesion is great so far. I placed on weathered mailbox post and painted front gate with ease and the spatula tool helped even out the round posts. The reflectivity is great and should help with visibility and Im hopeful the mailbox is now safe. I would recommend.

Nicely reflective. Adhere well if you clean th surface you are putting it on.

The reflective stickers on my trailer need a refresh so it was great that Im able to try these. They have a nice glossy finish and that helps add to the reflective quality. These are just as reflective as 3m stickers (I do signs for a living so Im very familiar). I saw that someone else had concerns about it not being that sticky but for me its definitely on the tacky side. I actually put it slightly crooked and went to peel off from the angle iron and it pulled off the paint so I cant expect it to be even stickier. I can see this lasting for many many years with no issues.

These are nice stickers that I am using to replace damages reflectors on a car trailer, I will also add side reflectors on a smaller trailer. The back is very sticky and they should hold as well as the original factory version. There is an included smoothing tool, but fingers work just as well.

We placed this reflector tape on our metal ranch entrance gates. We live on a very dark road with no street lights. The only way to see our gates at night is with headlights from a vehicle. We were worried this could be a safety hazard so we ordered these reflector tape strips. They stuck very well and are the perfect size. We have had several rain storms since we put these on and they have stayed in place. The reflection is adequate to provide the safety we need. So far, so good! I will update my review if I experience any problems down the road.

Seems like nice sticky tape. I like the design and think it’s nice It works as Expected It’s easy to use and reflective. I like the overall look and it seems pretty useful for reflection at night Overall I think it works well

Sticky stuff on the back is sticky. Using for my mailbox I am in a dark rural area so this helps finding the driveway. I used a razor to peel the backing off. Sticks well to the plastic mailbox. See no reason why it wont stick well to other surfaces. 5-stars

This conspicuity tape is as good as any other tape I’ve used. It has very good adhesion and the reflectivity is fantastic. I don’t know the letter of the law, but this tape does not identify that it is DOT-C2 approved. The listing says that it complies but the tape itself does not indicate it. This may not be an issue but wanted to call it out. I will use this tape to mark my 18’ car hauler which is rated to 7,000 lbs. Due to the weight capacity, this tape is not required, but why wouldn’t you want it? It’s cheaper for the trailer maker to cheap out and not apply it, but for this low cost, the extra risk reduction is worth it. If you are applying this to a trailer, the white block goes toward the front, red, toward the back. Begin and end at the ends of the trailer. If you have a dry van, the upper corners on the back should only be outlined with the white, no red there. Some of the pictures in the listing are wrong. If your vehicle requires this tape, at least 50% of the side length needs to have the tape. These precut lengths make it easy. Just put one on, skip a foot, then apply another. I like that this came with the plastic tool to press the decal down well. It should go without saying, but make sure the surface is clean before applying. Wipe with alcohol if needed to remove road roils and grease.

Needed to add some reflective stripes to the mailbox post and there worked great. I put some on the boat trailer and on the hitch hauler too.

Several strips come in package with a smoothing tool to get air pockets out. I did have to trim each one about 1/8th in along one side to fit on trailer angle iron. Adhesive seems strong.