Freud 42-116: 1/2 (Dia.) Bearing Flush Trim Bit

Good bit. Works great for flush cutting plywood in situations where you dont want to burn where the guide rubs. Like all Freud bits, came with quality carbide and a smooth bearing

Freud has lived up to their great reputation. This bit will be used to make an arch fill above a door in an brick house. I made a template from a 1 x 4 and let the bearing ride the template to form the 2 x 4s for the fill. This will ensure a perfect arch shape on every piece. Ive used shorter bits like this before on thinner boards with great results.

I used this bit to joint 8ft long 2in thick redwood boards for a table. It performed exceptionally well and Im extremely happy with the result.

As advertised

its an ok bit. ive been using it with my milwaukee 1.75 HP router with PT Fir 2x6 and on the bit it has already chipped a little. i was expecting the bit to last longer than that. oh and the bearing fell off while i was routing. i used a hex wrench to place it back on. maybe i got a dud product. others have had better luck than me.

Definitely a good investment for the price. Cuts great and quality is good

This product works well with the grain on straight pieces. If you are going to go against the grain or on curved pieces this wont work for you.

Put a 5 inch radius on some 2x10 following a template with this bit. End result is beautiful.

This bit works with 1/2 collect. It is large enough to trim 1 1/2 in countertop. Worked great!

The router bit is fine. Very good value for the prices. Getting the packaging open was a bit of a challenge. The secret bing that you need to cut the label that covers up the separation seam.