Hangman Products S2040A No Stud TV Hanger Mount TVs up to 55-Inch (Pack of 3)

It does the job, it’s better than what we expected honestly. We’ve bought $200+ mounts and this does the job!

I live by myself and did not want to hire someone or go through the whole stud finding process with no prior knowledge and this was the PERFECT choice to meet all my needs. This hanger comes with a variety of screw options so youre guaranteed to find the correct screws for the back of your television. and the hammering of the nails was a breeze. It took me NO TIME to get this up in my kitchen, by myself. I happened to be right at the door when it was delivered and I had it up before Amazon even sent me the email saying that it had been delivered! This is great for single women who dont want to invite strangers into their house to mount their television.

Easiest hanging of anything..ever.. I wanted to wall mount a TV without a big bulky contraption and didnt have studs in the area we needed to hang it. This was the perfect solution. It feels amazingly sturdy and I will definitely use it again. Only needed one set for our 42 TV and I believe one is all it would take to hang our 50 TV but Ill read up a little more just in case. My only question is the security line. I know its supposed to be an extra catch in the rare chance the TV falls, but given that its a single drywall anchor an screw in an area you obviously dont have a stud, it seems to me like it wouldnt really do its job. Lets hope we never have to find out because I have full confidence in the mount bar.

This was so easy to install I did it by myself in less than 10 minutes and all you need is a hammer And a Phillips head screw driver. It comes with a small level that attaches into the mount piece so you can easily get it leveled when you go to nail it into the wall which was seriously genius on the makers part of you ask me . I hung my small lightweight flat screen on my apartment bedroom wall and it’s been awesome. It should be compatible with any smart TV as it comes with the various screw styles to attach the mounting piece to your tv. Definitely would buy again and recommend to my friends and family.

Just got the hangman no stud TV mount for my 32inch television. Starting with the Pros: 1. Good thing is that I didnt have to drill a hole in my rented apartment for mounting my television. 2. Easy to install and can be done easily by 1 person. It comes with a small alignment tool that tells me whether the bar mounted on the wall is aligned correctly or not. Below are the Cons and the reasons why I deducted 2 stars: 1. The screws given in the package to mount the bar against the television were of no use. None of the screws fitted my 32 inch Panasonic television. The package comes with multiple screws with the hope that atleast 1 type of screw would fit the television. Luckily the 4 screws left after unscrewing the TV stand came in handy and I was able to reuse those screws for my TV mount bar. Just pure luck else I would have been forced to buy new screws from the market. 2. Doesnt give you the option to tilt the television and that can be a problem for some people. Also I would be afraid to mount more than a 40 inch television using this option. 3. Price of 30 dollars can be argued considering none of the screws provided were of any use. Overall not bad for a mount option that does not require drilling a hole in a rented apartment wall and considering its good enough for my 32 inch television.

They sell this at Walmart as well, which is where I originally bought this tv mount and decided to buy another one via amazon (Same price). I’m just mad that I have spent $150+ to have someone mount a tv before! I wished I knew about this then! It’s super easy! However, for my 55” tv, it was hard to screw in the wire down the middle, because you have to hang tv then tilt up and there wasn’t much space to drill. Tv pictured is a smaller tv so you can see where I drilled the wire in the wall (I think it’s a 45”?) Note that the middle hole to hammer the nails is NOT centered. I realized that after I hung the first TV (although it wasn’t off by much). For the second tv (pictured) I just measured the piece and used a pencil to mark the actual center by the nail holes on the mount. Can’t beat the price!

Since COVID, we have been using our backyard more than ever. We decided to get a TV for outside viewing and movie night with friends. Outdoor TVs are very expensive and wasnt prepared to spend that much. I get my TV through YoutubeTV and have Rokus on most TVs in the house, so a cheap TV with built in Roku seemed to be the perfect option. Also, since the Roku TVs weigh next to nothing, it would be easy to bring it in when the weather was bad. I needed a bracket that was easy to lift the TV off of, and wanted one that wasnt big and obtrusive when the TV was not being hung, and also didnt want to drill big holes in the siding. This bracket fit the bill. I was able to hang it with 3 nails that make tiny holes. The instructions say each nail will support 10lbs, and since the TV is 12lbs, 3 nails was plenty. It is barely noticeable, and just looks like a thin strip on the house. I can hang the TV in seconds when I want to use it, and take it down just as quick. Highly recommend this bracket.

Was more difficult than I envisioned but manageable. The instructions don’t specify, but you must use the included washers when attaching the mount to the back of your tv or the screws will slip through! Thankfully mine slipped out as I was standing beside the tv or it would have been a disaster. Was also difficult to see if the tv-side mount was slotted into the wall mount correctly without a second person there to look from the side. All that said would still recommend - it’s been three weeks and my tv is still hanging and when I move out there will only be five nail holes as opposed to four giant dry wall screws in the wall. Great product.

Like many, we built a fully functional shared office in our home, and we needed (wanted) a sharable screen between our desks. We didnt need anything fancy, but we wanted to avoid bolting into studs, mostly because wed be punching into an outside wall, it creates large holes to fill later, but mostly -- the studs didnt line up where we needed them in order to center the screen exactly where it needed to be. Enter this surprising little device. Low cost, easy install and totally adjustable. Sure, the TV doesnt swivel, or spin... It just hugs the wall, but thats all we needed. Also, it doesnt have to be perfectly centered, since you attach one V shaped long bracket to your TV and drop it into the V shaped bracket on the wall. Slide the monitor side to side until its where you want it to be, and secure the lock down strap which prevents the monitor from being lifted from the track. Installation cant be easier. No bolts, no drills. Place the wall bracket where you need it, and tack it in with one of the supplied nails. Then level it, tack it in on the other side, and then add the remaining nails (there are several, but theyre similar to picture hanging nails). Once all the nails are in place, the bracket can hold a lot of weight. We will be buying more for other TVs (including a 55 plasma) that dont need to spin or swivel. Absolutely recommended.

We wanted something light weight and easy to have our TV out when stationary and take off while moving our 5th wheel. Easy to install - liked that it had several small nails to secure it and spread the TV weight across the bar. Also appreciated the leveling tube. Glad I found this - perfect for what we needed. Now to figure out how to hide the cord and cable.