IR-Sensor IR Filament Sensor with Steel Ball, Magnets, Screws Kit for 3D Printer Prusa i3 mk2.5/mk3 to mk2.5s/mk3s Upgrade

I purchased 3 kits and I MISTAKENLY thought the magnets were not included. They ARE included and just tucked in a slot cut in the foam. Changing review to 5 stars and will buy again.

All the needed parts, for a fantastic price. This works 100% on my Prusa i3 MK2.5S+, which Id just upgraded from a MK2/S. All the parts (magnets, ball bearing, sensor, harness, and screws) were included, which really saved me a lot of time sourcing that stuff. One thing: My sensor did not work, until I switched the white wire (on the 5 slot connector side) from pin 5 to pin 4, as others mentioned (and you can also google Prusa IR sensor pinout to verify!) Once I switched the white (sensor) wire from slot 5 to slot 4 in the connector, and plugged it in, it works 100%.

it was just as describe everything was in package and the instructions was very helpful .

Was able to hook this up to my Duet board with ease. Works as it should, and fit an MK3S hotend.

This part worked great. Print your own parts, keep all the screws and this is an identical upgrade to the original.

At the end of the day this product works. My two big issues were that I was missing some long bolts(maybe I lost them). I was able to find them in the Prusa spare parts bag. The second was I used a black PETG. The sensor was not triggered by the PETG plastic flag. I ended up putting a small piece of metal duct tape on the PETG flag so the sensor would see it. Everything else worked like a dream. I am happy.

WARNING: was not wired correctly. The white, signal wire was in the wrong location. Making the item useless until the wire was placed in the right location. Works great after fix was made.

After my old MK3 sensor literally burned up, I got this kit. I printed all the new parts and assembled everything without issue. I now have an MK3S! I hope the sensor is better than the old one. Time will tell.

This worked will on the Prusa MK2 to MK2.5S upgrade with the Rambo 13a board. There were slots on the board for the connectors. It is nice to have an autoload feature on the printer. Fit very well into the printed extruder housing and all the parts are in this kit for the upgrade.

i have a am8 frame like the bear frame for prusa i am part hunting to make my anet as much a prusa mk3s as possible and this works i did have some firmware issues that i had to work out on my own like the #define FIL_RUNOUT_STATE HIGH norm is low by default its like the true/false for like everything else that why it took me 2day to find it while working on other things hope this help someone else so they dont waste time not printing