











L-Shape Corner Connector U Shape LED Aluminum Channel System (U Channel Type)
-
Karen Barton
> 24 hourChristmas lights
-
Ontario view
> 24 hourAlthough these corners dry fit nicely, they are the BIGGEST PITA that I have used in a very long time. I have been installing LED lighting for the past four years in my home and in friends homes. I just tried these on a recent project in a closet at my house. If you are trying to use the light strip without cutting it, it is almost impossible to make the turn without damaging the LED strips. The routing of the LED lights is such a problem that I almost gave up and removed the corners altogether. But I persevered and was able to finally get the LED strip through the corner. NEVER again will I use these corners. Ill go back to cutting the U channel and making the corners the more efficient way, then installing the plastic lenses over the U channel and into the corners. Yes the plastic corners look nice BUT are something I will never use on my LED projects. They are in the recycle box....
-
Charles A. Boyer
> 24 hourHard to get the led strip through it but it works
-
JackOVoltraids
> 24 hourHighly recommended product and seller
-
Robert w.
> 24 hourEasy to work with and looks great pro finish
-
MsYSmith
> 24 hourWorks just as good as the channels.
-
Robert
> 24 hourQuick ship perfect fit
-
hybridhavoc
> 24 hourI just wrapped up my fist LED strip install and used these corners. Absolute mistake. Its essentially impossible to feed any amount of LED strip through the corner, and if you do your solder / connections through the corner first, you cant get to the holes up actually screw the corners down. I ultimately ended up cutting a slit into the corner piece to slide wires through. I dont yet know what the better solution is, but I know there has to be one.
-
Megs
> 24 hourGood for it’s system
-
Ron Dillon
> 24 hourThese connectors fit well with the diffuser channel. the corner pieces i wasnt able to use in my application. The connectors for a 6 wire RGBWW strip wouldnt fit in them. the 4 wire RGB connectors will fit in them, but its very tight. The clips for the diffuser channel worked great. make sure you drill a pilot hole for the screw though, they strip very easily, but they are small screws.