Lenox Tools - 3002828L LENOX Tools Bi-Metal Speed Slot Hole Saw with T3 Technology, 1-3/4

Ive been trying several brands and have bought out the one size I need in several stores. Now we are not going through nearly as much. This is a good saw for mild steel pipe.

Absolutely the best hole saw bits out there. Runs through stainless like butter, cuts mild even easier. Highly recommend.

Ill leave it at that!

Works but not highest quality. Replaced damaged one in my kit.

Cut straight through a 12 thick hardened steel vault in about 13 seconds. 10/10 would recommend

Used to cut through wood.(2x4) Cut was good. Fairly easy to remove slug.

I have ten of these hole saws. I like them and I did not have this size so I bought it. they work great.

I have always had good luck with Lenox products and their hole saws in particular. However once mounted to arbor these are rarely very concentric and leave you with a rough hole that is often slightly larger than advertised aprox 1/16inch. If you want a perfect clean hole I suggest either carbide hole cutter or size yourself 1/16 smaller with these and finish with filing, grinding, sanding, ect.. Overall these are great quick way to make a hole in almost anything! Takes alot of abuse to ruin one of these even in steel. Remember to use compressed air to remove chips often a d alternate pressure bird pecking on metals.

ok

I burned the teeth off this size in my Lenox hole saw kit, and this is the replacement. They modified the plug removal slots on the side so its even easier to clear the plug out. (I got a diamond hole saw for stucco in the future.)