MSI MPG GUNGNIR 110R - Premium Mid-Tower Gaming PC Case - Tempered Glass Side Panel - 4 x ARGB 120mm Fans - Liquid Cooling Support up to 360mm Radiator - Two-Tone Design

In general I am well satisfied with this case. It is a mid-tower, so except a slightly more compacted space. Motherboard installation is very easy. The cables in the back are nicely bundled, but you have to open them up in order to get the front panel, audio and USB cables out to reach the receptacles on the mb. Plenty of places to get cables through from the back to the mb too. Important to note is that you can only install a 360mm radiator in the front of the case, and you have to displace the HDD bracket to get the angle to get the radiator in place. That just involves unscrewing three screws, two accessed on bottom outside of case. Of course this means moving the 3 RBG fans already installed on the inside front to the outside front, but they will fit under the front panel when you put it back on. Actually, the only place to mount any radiator in this case is in front. Top mounting would be too intrusive over the mb. Same for rear. Comes with four fans, and you can install two more 120s in the top. Not much clearance in the back, and my mb power cord along with the ATXs made it slightly difficult to get the back panel on. With two mounting points for SSDs on the back, you will have to be creative about where to put any others. Make sure you have non-angled SATA cables for these mounted SSDs. I like the magnetic dust covers, and the case design is sleek, simple and attractive enough. I’m no expert PC builder. I just wanted to replace my 6 year old case with something nicer to hold my newer mb and components. This one seems like a very good solution for my standards.

This was exactly what I needed and was looking for. I had been meaning to switch from a full sized tower to a Mid-Tower and this was perfect. The back panel where all the wires and cables are does require some management, but the velcro straps the case comes with helps with some of that cable management. The RGB on the case is bright and really beautiful. Definitely love this downgrade.

I have not build a pc since college and my son got into pc gamer which made me get into pc gaming again. That made me beside getting my gaming laptop also inspire me to create my own gaming pc. I decided to build my own pc setup and this pc case looked really good to me. My wife got me all the component for a early father gift and I put it all together two hours. This case has it all from easy of cable management to plenty of preinstall fans and also looked great. Now I am going to tidy up my wires and then fire up some modern warfare. Enjoy your PC Case!

Good airflow, it supports 360mm aio on top, front and 240mm on the side with plenty of space. Good airflow and support for beefy graphics cards

I purchased the 110R in Black. The materials and build quality are top notch. At this price its hard to find a sleek case with 4 RGB fans and a controller as well. However the airflow is pretty poor on the 110R. That is to be expected on a case with limited openings at the front . Removing the side panel I saw about a 10 degree drop in my GPU temps alone. Might not be a problem if you keep your ambient room temp in the low 70s.

In case you havent noticed from the pictures, the case cant have a 5 DVD/Blu-ray drive. Anyway, I dont need it, so very happy with this PC case, its perfect.

Llega impecable y ahora que la vea es mejor de lo que esperaba. La caja llegó un poco golpeada pero me da muy igual. El único problema es que al sacarlo de la caja me encontré con unos pequeños rayones, osea que me vino rayado de la fábrica. Es lo único y la verdad no se nota mucho.

Ive been building my own computers since the 80286 days. Different MOBO manufacturers and different cases. This case is without a doubt one of the nicest looking and has the best layout Ive used for even large graphics cards and AIO coolers. Plenty of airflow/ventilation to include locations for up to 6 cooling fans. Well built and sturdy which means it is not flimsy and therefore heavy. Depending on your build, you may be finding yourself doing a lot of deconstruction to get your equipment laid out the way you want. Im running an MSI MAG Z690 Tomahawk WiFi Gaming Motherboard; Intel i9-12900K CPU (OC to 5.12GHZ); MSI MEG CoreLiquid S360 - AIO CPU Liquid Cooler; MSI Gaming GeForce RTX 3070 Ti 8GB GDRR6X 256-Bit graphics; 64GB DDR5 Kingston Fury 5600 memory; SAMSUNG 980 PRO 2TB PCIe NVMe Gen4 Internal Gaming SSD M.2, EVGA Supernova 1000 P6; 80 Plus Platinum 1000W PS. Running MSF-S2020 at full graphics capability and overclocking the CPU &GPU does not cause any overheating conditions indicating the superior airflow this case provides. Definitely recommend.

I want to love this case - aesthetically it is really a pretty case. But the issues are simply too many to justify either the cost or a better rating. - The filter mesh on the top, while still flimsy, at least has somewhat of a frame (of magnets). The other filter meshes - at the front and ant the bottom, lack any frame whatsoever and slide into stamped metal tabs. The meshes catch on every other case feature - making cleaning and repositioning more of a chore than it should be. - The fans all connect to a proprietary hardware splitter that works with a hardware button. For some that may be a bonus. But if, like me, you want to control your lighting via software, youll be buying an RGB splitter cable. Oddly, the manual shows the case coming with such a cable but it isnt included. - The case has 7 (main) trapezoid shaped holes for wire routing. Oddly, though, the case only comes with 3 of the rubber wire-hiding gaskets for those holes (the 3 parallel to the front of the case). If you want to hide the wires where they go into the PSU cavity - youll have to (try to) obtain more. I say try because MSI customer service seems to be clueless as to what youre asking for if you call or put in a request on their website. - The PSU cavity is *very* snug. Since wires will likely need to be routed through that cavity - its tight enough to make PSU connection a royal pain. - The proximity of the top of an ATX board to the top of the case makes many (probably most) AIO cooler installations problematic. Its close enough that RAM installation will likely be a problem as will connection of any top-of-board connections (PSU +8 connector, fan connectors, etc). In short - in terms of pure looks, it really is a pleasing case. But the overall smallness of the case is anything but optimal. This is pitched as a mid-tower but is frankly the tightest mid-tower Ive ever used. That coupled with the corner-cutting (cheap filter mesh; missing wire concealment gaskets; proprietary RGB splitter) make this a miss. UPDATE - 2 days in. I always emphasize post sales support should any be needed - and in my case it is and was. Good customer service can elevate a ho-hum purchase in the same way that poor customer service can detract from a purchase. In the area of customer service - MSI is a plain fail. I called again today to check on part availability. MSI, apparently, has only one person working in that department. Lets just say that her attitude is in the badger range. How can I help you? Are you by chance the same person I spoke with yesterday? How can I help you? Im just trying to ask if youre the same person so I dont have to try to explain the part I need again. How can I help you? Okay Im looking for a case part - the wire concealment gaskets. Yes you called yesterday. Im still looking into it. Ill get back to you. When? Today. You said that yesterday. With phone manners like that - this transaction is filed under never again. As in MSI is off the menu for me. I refuse to do business with a company that simply takes your cash and runs - and fails so miserably at basic post-sales support. I get it that this person may not be fired up about their job. But heres a clue: get a different one. Update 2: Well - a full 2 weeks later, several emails and 5 phone calls and nobody - *nobody* - at MSI will lift a finger to assist with what shouldve been a simple part request. In short - MSIs customer service at least as it relates to parts requests is pitiful. MSI is a brand best avoided.

This case is really nice and gives plenty of space to route wires. I can easily fit a 360mm radiator in it. not a big fan of the front glass panel, but i keep the side panels off anyway since airflow is better without it.