MUSETEX ATX PC Case Pre-Installed 6Pcs 120mm ARGB Fans, Mid-Tower Computer Gaming Case, USB 3.0 Tempered Glass Phantom Black Computer Case, MN6-B

Bought this as it was on a great sale and I decided to build another pc. So far I have not a single complaint. mostly assembled and wireless router in a way that so that the fans are already done that cuts out some time on the build. Also I typically dont enjoy physical installation part (I have very large hands, hard to get around tight areas on some builds... but this was built with very good airflow and cable management options on top of that I didnt have a problem installing due to hand size(almost always gets me upset at least a few times lol) but I enjoyed the architecture this go around. Highly recommend it, I got it 70+% off by luck. Power supply area doesnt have view from glass so dont spend extra for rgb on it just giving my 1 thing I would of slightly changed but thats it and it really isnt a negative just my personal wants.

I didnt dislike anything about this case it has awesome wire management spots and the fans are nice led

This case could be just a bit taller it was hard running the cables to the top of the motherboard from the top there is not a lot of room and if I was just a bit taller you could fit a 240 rad in the top but its just to short. I had an issue with the argb fan controller and customer service took care of my problem and shipped me a new one hassle free

I put the case together and it looks really nice, really like the controls for the rgb fans. BUT there are a few problems - the description states that there is room for a 240mm radiator at the top and in the front. In the front with a regular AT board, no problem getting a radiator in there. Plenty of space. At the top, however, if your board has heat sinks along the top of the board like every z370 or later board Ive seen, then there is barely 25mm of clearance between the motherboard and the top of the case. This is room for the pre-installed fans, but not for a radiator as well. Also the ARGB board that it comes with has a 3 pin (VGD) or 3 pin 5V ARGB cable for connecting to the motherboard, but MSI uses a 4-pin (12V,G,R,B) header instead. Plus since I cant connect the preinstalled fans to the motherboard, they cant be ramped up/down based on temperature. Im going to end up swapping out four of the six for Noctua fans which are probably better anyways. Also, while there is space for 3.5 hard drives in the bottom section of the case, it doesnt come with drive sleds, though it does include standoff screws that can hold the drive in place, but they are metal on metal so you will get some hard drive noise when the drives are active. The good news is that the preinstalled fans are pretty quiet, and look great, just really bugs me that I cant sync them with my CPU pump, RAM, and motherboard lighting since it doesnt work with my board.

So the case is made with fairly good materials, looks cool and, the size is perfect for my room. When I bought this case I stupidly thought the pre installed fans had a 4 pin 12volt connector sadly it’s a 3pin 5volt connected that’s my fault. So before buying this case make sure your motherboard supports three pin five volt fan connectors otherwise great case for its price

WOW-WOW-WOW, what a great case with all the extras included. A lot of thought went into creating this case. I will definitely use this one again. For easy installation read instructions and install as many components on Motherboard prior to install. This is an amazing case, did I mention AMAZING. The fans have alternative positioning as well as the power supply. I am just totally amazed on how thorough they engineered this case. Thank You, Thank You, Thank You, John Vaillancourt

Im not sure if most of the issues with this case were caused by manufacturing problems, or by a MUSETEX shipping issue, because I bought this as an Amazon used and new purchase from MUSETEX. It was advertised as having large, cosmetic damages but , while the case actually looks NEW - there was only a single, broken, piece of styrofoam used as packing. For a case with electronic components, and glass panels, that was a shock. My brother has built over 20 PCs in the last two years, so I have a pretty good idea of how a case is usually packed. This was really poorly protected. If I did not need the case so badly - after waiting over three weeks for it - I would have requested a return. The things that I can definitely point to as manufacturing issues - first off, for the price, this case is small. Like will it all fit? small. Answer - it probably will, but not without a good bit of cursing and legerdemain on the builders part. Second - at this price/size point there is not even a plastic HD insert? Remember, this is advertised as a Mid-Tower. The issue that may have been due to the poor packaging - TWO of the fans refused to work when tested. After working with them awhile we got them running, only to have them quit again. So they got tossed, and Ill be replacing them with two mismatched fans I had. On the good side, this is a nice looking case. Ive seen a lot of cases the past few years and this is one of the more attractive ones. So, if everything works, and fits, you may well like it. UPDATED - I have updated this rating to reflect that MUSETEX reached out to offer a refund. So they get 5 stars for customer service and standing behind their product.

To small for a full size atx motherboard. It will fit but just barely. Also you have to remove the top fans and the rear fan to get it in. Air flow is not very good. And why have a filter on top when it exhaust out the top. Seems it should be reversed but then you can’t get the air out of the cabinet

A beautiful case for anyone who likes RGB (or if you’re my boyfriend and you say you don’t like RGB but after putting it together, you LOVE it). The instructions are a bit confusing as they don’t say much, you kind of have to know how to set up a PC case or watch YouTube videos on it. It does come with 6 fans. Yes, you heard me, 6 FANS!!! It also comes with a remote so you can change the colors and has 3 music sensing options. It’ll detect any sounds coming from you or music if you’re playing it out loud. We couldn’t connect the 5V ARGB to his motherboard since it is an older model (msi z170-a pro) as it doesn’t have the pins for it, but that doesn’t stop the RGBs from working. Sadly he can’t get the included RGB control panel on his PC to customize the lights more because of that. Still, an amazing case if you’re looking for a colorful and COOL PC case!

Got this case recently! Absolutely loved it was easy to install everything and was so excited as this is the first one Ive build from scratch. I turned everything on to make sure everything worked properly before putting the glass side panel on. Once i verified everything was working and good to go i powered everything down so I could put the side panel back on was working on lining up to holes for the screw and suddenly the glass completely exploded everywhere! I never bummed hit or pushed on it. It just completely shattered. Im really bummed out. Update: contacted the seller and they have been really helpful! They are sending me a new side panel and have taken every step possible to make sure they sent me right panel. I havent received it yet but will update once I do. Update: wow guess I forgot to update again. I received the side panel and it was wrapped great! Was able to get it unwrapped and installed with no problems at all! Great customer service!