NZXT H7 - CM-H71BW-01 - ATX Mid Tower PC Gaming Case - Front I/O USB Type-C Port - Quick-Release Tempered Glass Side Panel - White

NZXT’s customization is endless. I went with a standard RGB lights and it still looked FREAKING AWESOME! One thing I didn’t know that the front 3 fans are part of the case, back fan is a 140 none RGB fan. The RGB control was pre installed. I added KrakenZ73 AIO and rbg back fan. I highly recommend for new pc builders, NZXT’s gear is pretty easy to install. For those who have problem connecting RGB fan to make your fan glow: Make sure you install in/out cable that comes with Z73 into 1 adaptor. The manual should clarify on that. My set up for this is: Motherboard: Aorus Z690 Ultra DDR5 CPU: Intel core i9 12th gen 12900K GPU: gigabyte GeForce RTX 3080 PSU: NZXT C1000 (850 is plenty) RAM: Corsair vengeance 64G RGB DDR5 I’ll be adding the RGB cable light next!

I bought this knowing that it was through Amazon warehouse and it said it was in like new condition. I can confirm that it came in a bit of a beat-up box but the unit itself was in perfect condition with everything still in the original packaging. If you buy it and it says anything other than like new be wary that previously I bought one that was missing the actual fans. This is a great case to build in and looks great

Got the asus z690 eva edition running a 12th gen i9 with eva edition asus 3080 12 gig gpu and the ryujin 360 eva edition and the Asian horse matrix 360 up front and a cool masters 120 halo out back

Got this case on Sunday, hadnt opened yet, starting building my pc today, opened up the accessory box, and bam, no long pack of screws, Id like to get the screws as soon as possible, but that might not be the case,

So far so good.

Given as a gift to my grandson and he build this to his specs and he finds this fantastic. Great fans. Awesome unit

The case itself has pretty high materials quality. It has a nice weight, not too heavy and also not too light. The ease of building with this case is nice. The IO is better than most and has a few quality of life features. The listing however is not correct. This case does NOT have 3 case fans. It only has 2. The front of the case 1 single 120mm fan and the rear has a single 120mm case fan. That is all. There is not another case fan for this case. That means I now have to buy another case fan in order to setup the configuration I need in order to have a positive pressure setup to mitigate animal hair, as I have 2 dogs. At over the $120 price point you should expect 3 case fans or at least the correct listing of the number of case fans in the description. That was the primary reason for the purchase of this particular case.

The NZXT H7 Flow is the case weve all been asking NZXT to produce. Although I have used the H510 in many builds and didnt find them to be the ovens that the internet says they are, I still thought NZXT could produce something better as a successor. What we actually got here was a successor to the H710 case, and Im OK with that. The NZXT H7 takes design elements from both H510 and H710, and the result is a truly beautiful, yet simplistic and effective design. Upon unboxing mine, I was surprised at the larger size of the case. However, being that the H7 supports 360mm radiators with either front and top mount support, this is about as compact as it could be. Lets talk about who this case is for. Its not a budget case. This is definitely a mid-tier enthusiast case, at this price point. It is going to be best enjoyed by someone who plans to buy their own fans, and the ditch the included fans. This case would be a great option to show off your RGB components, though I think it looks just fine without it, if that isnt your cup of tea. I opted for the White/Black version, which I think makes for some of the best looking builds, and I personally love the contrasting parts throughout the entire build. Both the front and top of the case are well ventilated, and both have filters. I opted to remove my top filter, as it isnt necessary for my top mount radiator setup, or exhaust fans in general. The modularity and fitment design of the case is wonderful overall, and it was a complete pleasure to build in. The wire management channels and velcro ties are well thought out, and effective at controlling the wiring on the backside. There is a good amount of space to work in, both inside the case, and below the power supply shroud from the back. If using power supply extensions, you will have to take your time, as the space between the motherboard tray and the back panel is fairly narrow. In terms of included hardware, NZXT seems to changed up what is included in their hardware box. For example there is no longer a Y-adapter for headphones/mic to be used with the dual headphone/mic jack on the top of the case. Oddly enough, they do throw you an extra 2.5 drive bracket though. The hardware is pretty good and I think it offers a good value to the buyer. Again, the case does offer 360mm radiator support for both the top or front of the case. If you want to make a radiator sandwich though (push+pull fans), your only option will be to front mount it, as there isnt enough room for two sets of fans along the top. I opted to top mount mine, and set my fans in push below the radiator, and Im very pleased with the results. Ill note that my build has 7 case fans, plus the 3 fans on my GPU. My build is incredibly quiet. If you do decide to front mount your 360mm AIO, youll almost certainly have to mount it tubes up, which contrary to the internet hype, is totally fine and wont hurt anything. In this first build, I liked the presentation of the top mount and the tubes didnt need to do any crazy bends to make it fit. I chose to mount my GPU vertically, strictly for aesthetic reasons. However, I didnt go with NZXTs vertical GPU mount. Instead I chose the Phanteks PCIe 4.0 model, mostly because it was over $20 cheaper, and also because it has mesh across the unused space on the rear part bracket. The new NZXT mount as solid, with no mesh, at a jaw-dropping $90 US. The Phanteks vertical mount also doesnt require any modification to your case, as it did with previous cases like the H510 (which required cutting of the slot dividers). Securing it by lining up the set screws required some patience and good lighting though. Overall, I think it turned out great. Personally, I liked the previous design of the hard drive cage in the H510. It was completely adjustable, and easily supported three 3.5 drives, not just two. Also the H7 HDD cage is secured by four slide-lock feet and a single captive thumbscrew. This is an issue because there are essentially only two positions you can have the hard drive cage in. There are some other compromises as well. One of them is that at this case height, push+pull radiator setup isnt possible with a top mount setup. Also the length of this case would make dual 360mm AIOs (one top + one front) virtually impossible as the tubes would potentially fight for real estate. This might not matter if you are doing a custom loop though. I do have a real gripe about my example. My hard drive cage was drilled wrong. The top slot of the cage had the holes drilled slightly out of spec, so the holes didnt line up properly with the hard drive. I needed to move my HDD cage farther forward to provide additional room for my PSU cables. This would have been fine, except the other hole was threaded wrong, and the thumbscrew wanted to go in at an angle and siezed up. I was able to remove the captive thumbscrew and use another thumbscrew, this time from the bottom of the case, and I was able to rememdy this. Even though I was able to work around this issue, they were super annoying to experience, having bought into this case at a $130 price tag. I was able to work through it because I am an experienced builder, with lots of spare parts. A newcomer might be less thrilled than me with this scenario. These speedbumps are typical for a new product, but are no less frustating admidst what is otherwise a near-perfect case, in my opinion. NZXT clearly needs to clean up their tooling or QC on this model, to make sure the customer recieves a quality product, like the ones NZXT is known for making. Aside from these little issues, I think the fit and finish otherwise are excellent. Im fairly certain this H7 Flow will be an instant hit for PC enthusiasts, and I predict it to be successful enough to get a version 2 down the road. If you are thinking about buying it, I think youll be really pleased with it. The photos are very good representations of what youre actually going to receive.

my son said it is perfect.

Im building a new pc right now and only need a couple parts left. This case looks & feels amazing for the price. Im upgrading from my old Corsair 4000X case. This new NZXT case is slightly larger. One thing I do want to mention. The box it came with was a little beat up but no scratches or visible marks on the case itself. If youre thinking about getting this case, do it. Its honestly one of the best on the market right now.