PGN UCP204-12 Pillow Block Bearing - Pack of 2 Mounted Pillow Block Bearings - Chrome Steel Bearings with 3/4 Bore - Self Alignment

I loved the look of them but they didnt fit my 3/4 axle:(

They do the job

The baring locked up in less then a month. Also I had to set the baring in place because they werent straight.

Failed within two weeks

The pillow blocks were advertised as having 3/4 inch bore but in reality the bore was undersized, so a 3/4 inch shaft willl not fit.

it took two sets to make one so far is working time will tell

Its been running nonstop on my tumbling machine I built for a week and works great. I like having the grease fittings.

Used in a swamp cooler. Much quiter now. Good product.

Received a pair of these 3/4 bore pillow blocks to support an arbor. I machined a shaft to fit the bearings and theres not much to say, except the dimensions were right on and the pillow blocks are well made.

While they seem well built, they are apparently 19 mm (.748) . As I was supporting the shaft on the ends, I was able to turn the excess off the shaft to accommodate the bearings. Once that was done, they suited my purpose very well, but you wont be able to put a true 3/4 inch shaft into these.