PoE Injector Adapter, PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af/at Compliant, Up to 100 Meters (325 Feet)
-
Arturo Salazar
> 3 dayIm happy, it turned up my 3802i. Hope it last long.
-
Liz B
> 3 dayI had two of these. They both died between 9-10 months of use.
-
Michael
> 3 dayI have purchased a lot of these products. We use them on everything from 5 port switches to access points. They work great. Theyre inexpensive and hold up well.
-
Cody
> 3 dayJust very simple to use plug and play no wiggle on the plugs everything is tight and snug. Great product
-
Haley Smith
> 3 dayThere is not much to this product to review. It was recommended to us by our IT professional. Easy install and it does what its supposed to do. It arrived when promised. There was no need to contact technical support.
-
Mister Andy
> 3 dayI had an older Cisco Wireless AP lying around that I wanted to redeploy for home use. This PoE injector worked and was very easy to connect.
-
Prof. Russel Johnston
> 3 dayI had a Unifi AC Pro wifi from work, but no POE adapter for it. I tried an old adapter but it didn’t supply the correct power. This was the best price I could find and it worked perfectly out of the box.
-
bonedaddy4538
> 3 dayBought this because it was the cheapest I could find on Amazon. Works well with my Aruba instant iap-225 and iap-205
-
W. Barnes
Greater than one weekNot much to say. Good quality.
-
David Dallas
> 3 dayI had a POE camera that kept dropping. Really thought it might be the previous injector because the unit was hot. I replaced it with this one, and it has worked perfectly...
Product Features
Supports 10/ 100/1000 Base-T applications
LED indicators power input and PoE output
Internal AC/DC converter no need for external power brick
Easy plug-and-play installation
Muti-protection
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| PoE Injector Adapter, PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af Compliant | ThePoEstore Gigabit PoE+ Injector. Adapter Injector， 10/100/1000Mbps RJ-45 | ThePoEstore POE Extender, Supported 1 Port 10/100Mbps, Comply with IEEE 802.3af | Power-Over-Ethernet Extender Outdoor Waterproof, 1 Port Gigabit PoE Repeater | Gigabit PoE Extender 1 in 2 Ports Work with PoE Switch PoE Injector, 30W PoE+ | Gigabit Power-Over-Ethernet Extender, 60W PoE+ 10/100/1000 Mbps Extender | |
| 802.3af / PoE | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 802.3at / PoE+ | ✓ | ✓ | - | ✓ | ✓ | ✓ |
| 802.3bt / PoE++ | - | - | - | ✓ | - | ✓ |
| Ethernet port | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps |
| Indoor | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Outdoor Waterproof | - | - | - | ✓ | - | - |
| Output Port | 1 | 1 | 1 | 1 | 2 | 4 |
| Pin Assignment and Polarity | 1/2 (-), 3/6 (+) | 1/2 (-), 3/6 (+) | 1/2 (-), 3/6 (+) | Input: 1/2 (-), 3/6 (+) , 7/8 (-), 4/5 (+). Output:1/2 (+), 3/6 (-) | 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+) | 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+) |
| PoE Output | 30 Watts Max, Typical Voltage: 50V, Support any PoE/PoE+ device (44V ~ 50V) | 30 Watts Max, Typical Voltage: 54V, Support any PoE/PoE+ device (44V ~ 54V) | InputPower:13Watts OUTPUT:12.2Watts 30 Watts Max, Support any | 30 Watts Max, Support any PoE/PoE+ device | 30W mid-span (802.3at,Output voltages 50V) (802.3at,Output voltages 54V) | 60W mid-span (802.3at,Output voltages 54V) |
Anti-interference protection
ThePoEstore 30watt Gigabit 802.3af/at PoE+ Injector PoE Output :
Pin Assignment and Polarity: 1/2 (-), 3/6 (+)
- Output Power Voltage: Typical:50V, Support any 802.3af / 802.3at device (44V ~ 54V)
- User Port Power Output: 30W max
Protection:
- Over current protection
- Over load protection
- Over voltage protection
Environmental Conditions:
- Operating Humidity: Maximum 85%, Non-condensing
- Operating Ambient Temperature: 0 to 40°C
- Storage Temperature:-40 to 40°C
- StorageHumidity: Maximum 90%, Non-condensing
Input Power Requirements:
- AC Input Voltage: 100~240V
- AC Input Current: 0.5A 100~240V
- AC Frequency: 50 to 60 Hz