[Pro Version] KIWI design VR Cable Management, 3 Packs VR Pulley System fits Quest/Rift S/Valve Index/HTC Vive/Vive Pro/HP Reverb G2/PSVR/PS VR2 VR Accessories, Compatible with Quest 2 Link Cable

Got these and was pretty excited to use them. When I first tried them out, it wasnt the most comfortable ever but was better than having the wires in your face. I have the oculus quest 2, so when airlink rolled around, I no longer had a use for the pulleys. I decided that it was time to get rid of the pads that hold the pulleys up to the roof, but when I tried taking them off, it peeled off the paint and had exposed the insulation in the ceiling to eyesight. Now I have to remove two more, and on top of that, hope I can paint over it with the same-colored paint. Thanks a lot.

I use the cable management system with my Vive Pro headset. I used the included sticky patches to secure the pulleys to the ceiling. They do the job to apply the correct amount of tension to support the cable to the headset.

I have a 10x10 VR play space. 2 pulleys was all that I needed. I have a 16ft cable and i can easily move around my entire play space. Edit: I ended up using all 3 pulleys. You can adjust the amount of slack as needed.

This item works well to avoid getting tangled in your VR headset cable.

They provide good solution to keep the cable out of the way. Still had to use TurnSignal though to make sure it doesnt twist too much. The problem occured when I tried to remove one of he sticky pads from the ceiling. I was patient and heated it up with a hair dryer and tried to take it off slowly but it still took off a patch of paint as well as paper underneath. Now I have 2 more of these disasters sitting in waiting and a pain of matching the ceiling paint and repairing it since my landlord wont be happy if they see it.

I bought a set of these back around April or May when I got my Oculus. Theyve worked like a charm ever since and I havent had any breakage or loosening of the cable in the eight or nine months now that Ive owned them. I had one left over and just discovered I can use it to keep the cable out of the way on my studio monitor headphones for playing guitar, works like a charm. If I ever need more cable pulleys in the future Ill definitely spring for another set of these.

These do exactly what you want them to. They hold the cable for the VR headset (in my case HTC Vive) up and out of the way so you dont have to worry about stepping or tripping on it. I cant rate the adhesive hooks that are provided because I mounted mine with sheetrock anchors in the ceiling. When we moved, I immediately put in the extra work to set them back up on the new ceiling because they are worth it to me. The only bad thing I can say about them is that I wish there was a longer version because my ceiling is higher than normal so I cant easily lay flat without pulling on the cable a bit.

So far i got 3 sets of these and they work great i use them on multiple Vr sets in room scale they came with everything i would ever need for my room scaling Vr wires all but carabiner clips no problem carabiner clips are cheap to buy on amazon, Thank you for the great VR Pulleys sets, The HMDs are unclipped in the picture i used 3 pulleys for the Vive Index and 2 pulleys for the Oculus Rift CV1 only 2 pulleys for the oculus rift CV1 do to the oculus wires are much lighter then the Vive Index wires, the pulleys have some major tension to them while under load using to many pulleys they will pull your HMD off your head or ripe your wires out the HMD so make sure you have a Loop behind your head when pulleys or being used and dont go over board with pulleys or will be hanging yourself from the pulley tension the wire sets for any vr system are expensive.

Theres not much to dislike about this pulley system. It does exactly what you need it to do, it keeps your VR headset from getting all nasty and tangled up ;o

As the title says. Zero complaints so far.