











SINTLY 6AN 10FT Fuel Line Hose Kit, AN6 CPE Braided Nylon Fuel Line with 6PCS Swivel Fuel Hose Fitting Adapter Kit Silver
-
Jon
> 24 hourIts got enough options for fittings included so you can route it well. In my case, from the fuel cell to the filter and then to the pump. It also includes a pair of cloth gloves. Probably wont use them for this specific project but its nice to have and the quality isnt all that bad for cloth gloves. Doesnt affect the star rating. Hose and fittings look good. A 10AN wrench is also included so add to your collection. Nice all inclusive kit to get some fluids moving. This is the 10AN kit and only 10ft so make sure you measure twice. The factory hose ends will need to be trimmed off (frayed from factory cutting).
-
Schu
> 24 hourThis kit allowed me to make an EGR tube for my truck, a part that is very difficult to source and expensive. The 10AN fittings fit my EGR valve and exhaust tap perfectly.
-
Wes
> 24 hourVery nice kit, I just used this the other day to install new oil cooler lines on my Chevy K1500. The ends are easy to install, no leaks and everything looks nice as well.
-
Dennis
> 24 hourThese are easy to assemble and seem to be of very good quality. For the price, you are basically paying for the hose and the fittings are a bonus. So, it is a pretty good deal. There are no instructions in the box on how to put theses together. There are plenty of instructions online. I suggest you look a few up before trying to assemble these. They arent hard to assemble, but, it is easy to screw it up. Most importantly, make sure you cut the hose square and use oil on the fitting when you screw it in.
-
Jen M
> 24 hourEasy to use if you know what ur doing. Ran new fuel lines and only one month in, but holding up in a hot race engine bay
-
Jake
> 24 hourThis kit includes a glove and a wrench?! This AN kit really surprised me. Some AN wrenches are priced at 30% the cost of this whole kit. It includes more than some of the other large name kits for the same price. The quality seems great and I have had zero issue with leaks. The fittings seem good quality as well. Everything came packaged nicely. What a great kit! If your in the market for an AN fuel line kit I would absolutely recommend this one. If I encounter any leaks or issues I will update the review.
-
Terrell
> 24 hourVery well made kit and the accessories included are solid. This is our second time buying a fuel line kit from this company, our first was a 25ft kit and we have had no issues. We havent used this kit yet but we did go through and check everything out and the quality is consistent. 5 star worthy for sure
-
David F.
> 24 hourThis is a complete set to make up a low pressure (the hose does not have any certification marking so I would not suggest using it for anything over 100-125PSI). It include a pair of much better than expected gloves to use when handling the hose to guard from cuts with the single layer steel braid in the rubber. It also has a outer fabric braid for abrasion resistance. The included AN wrench is just the ticket to prevent damage to the aluminum fittings. The set includes one pair each of straight, 45 and 90 degree fittings to allow you to make several shorter or just 1 10 long hose to suit your application.
-
djm3311
> 24 hourThese are going to look so good under my hood. They are EXACTLY the same as the very expensive fittings and hoses on the car sites. VERY happy with this item.
-
roustabout bill
> 24 hourThis is a high quality, safe and durable fuel line, etc. product that has many engine related uses. I got this to replace a slightly crimped diesel fuel line leading from the pre-filters to an injector pump, (on the supply side), that is on a 1990 Case-1155E, tracked front loader. I removed the injector pump and had it rebuilt and when I re-installed the pump, I bent the line. A mechanic told me that even a slight crimping could restrict the fuel flow, as I have had trouble starting the engine since I worked on it. Using the included fittings and even wearing the gloves and using the included wrench, I cut the line to length, put the fittings on, tightened it all up and bingo, the engine started up immediately! I did not need the high PSI potential, but being on the suction side, this did not leak at all. Great find! Excellent high quality repair kit. Now I am looking for more uses for this great product- out in a very remote location!