Siraya Tech Fast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing(Grey, 1kg)

Okay so now that I have gone through about 4-5 bottles I can say with confidence that this is the best budget-friendly resin on the market. I almost never have failed prints, the quality is always great and overall, I am just so pleased with this product. Using the settings I use on my Elegoo Mars 2 Pro I get perfect prints every time. I am not the best painter but you can see the detail in the tentacle of the second bust. I included my perfect print settings to help others who may struggle.

This resin is the best Resin that I have used. Previously having used Anycubic eco clear, and an elegoo resin. No matter the settings my prints would fail, even when using the recommended settings from the manufacturer. This resin has a close to 100% success rate for me. I do get some layers of resin that seem to be printed as a half sheet. But that is most likely an error with my Anycubic Photon Zero, but cant be sure. Overall this is the resin I always recommend

Siraya Tech Resin. Quite possibly the most popular hobbyist resin on the market. New to the tech & started using it right away and havent had any issues related to quality. We use it for doing prototypes that require flexibility with toughness. Im also finding its very easy to combine with other resins within the product line. Im even mixing it with titanium dioxide & its performing well! Ive yet to test the detail quality but I plan on it soon. Great quality resin for a little bit more money. Its well worth it imo.

Perfect little low speed drill for pinning minis. Make sure you make a small hole with something if what youre pinning is hard. Even though its slow, it can still skip off center.

I am a recent convert to Siraya Tech ABS-like. I had been using zMud, but it was out of stock. A colleague of mine suggested the Siraya Fast. I already used Tenacious to mix on certain miniature lines, so I wasnt too hard to convince. Did my first plate of miniatures last night in Siraya Fast and not a single failure. Prints look solid and feel tough. The supports were.much stronger feeling than Im used to, in a good way. The Siraya printed minis washed easy and the details were definitely there. It is about the same cost as what I was using and just has an excellent out of box look for miniatures. I know youll eventually get around to priming and painting them, but until then they will look like magnificent little statues. Oh and I didnt notice any strong odors like you get from other resins. I print professionally and I think this is my new resin of choice.

I did not expect this to be this good... Im going to order more and maybe try the grey/navy grey

Im in the middle of an engineering project (basically a custom RC plane), and needed some small, precise parts that still need to take decently significant loads. Of course print quality and resolution is a more a matter of what printer you have, but I can say this stuff printed fantastically on my Photon Mono S with the settings recommended by Siraya Tech (you can find a spreadsheet on their website). The parts that I got are incredibly strong. I know this is an ABS-like filament, but Ive legitimately gotten better performance out of these than actual ABS from an FDM printer. That is most likely because printing orientation does not matter nearly as much, so the parts turn out mostly isotropic (equal strength in all directions). Ill describe some of the cases I used this for below. MY USE CASES: One of the parts was a stepper motor gear (28BYJ-48) that needed to deal with up to 0.1N*m of torque. I can tell after a lot of use, the section that meshes with the stepper pin has worn down from perfectly tight, to having maybe 3-5 degrees of slack, but its still perfectly usable. Many of the parts require linkages between them, so I printed 5mm pins. In my case, I had to reduce the size of the pins to about 95% to avoid clearance issues, but once they were in place the pins had very little friction while still providing very tight joints. Additionally, those pins could handle a surprising amount of shear force. I tested with a 5kg weight, so statically thats about 2.5MPa, but I also drop tested with that rig, so it could have easily reached 25MPa at one point. CLEANING: Specifically regarding this resin, you have to empty and clean your vat within 2 days if you dont plan on printing again. This stuff will separate into layers in about that time and becomes harder to clean off the vat. Also, water curing has yielded good results for me. If youve never resin printed before this part is for you, otherwise move along: Cleaning the prints is quite a hassle. They come out coated in liquid uncured resin which is, in the case of this resin, definitely a nasty skin irritant and potentially toxic if ingested (most resins are). Youll need LOTS of isopropyl or denatured alcohol, at least like 2 or 3 tubs or large tupperware containers, lots of paper towels, definitely more gloves than your printer comes with, and some way to get rid of the fumes. The alcohol is smelly enough, but this resin is definitely nasty stuff to be around. You have to be very careful not to get it on your skin or other surfaces (as it is quite drippy off the printer). With this resin, I got the best results by cleaning with alcohol from a spray bottle, then rinsing in water for 30 seconds, and then submerging in a cleaner tub of water before leaving in the sun (for 45 minutes) or shining with a bright UV light (1 minute or more, flipping the part with tweezers). I tend to keep one tupperware container for the alcohol cleaning process, which is very thick with uncured resin, one container for dirty rinse water, and one for clean water (and a bonus extra container to place all my contaminated tools and paper towels). I can usually run with this setup for several prints without changing out the liquids, which is nice because you CANNOT wash this stuff down the drain (unless you want even more micro-plastics in the ocean), and it absolutely has to be cured before you dispose of it. I typically save my 2-liter bottles and old mouthwash bottles, dump everything into those, and leave them out in the sun for a day before putting in the trash. CONCLUSION: If you can deal with the hassle of cleaning and PROPERLY discarding of the waste, then this resin produces results that you simply cannot get with other printing methods. Sure, FDM printing is less toxic and usually easier to get larger prints with, but the precision and speed of resin printing is unmatched. Usually that comes at the cost of poor physical proteries, but with this resin, you can get really small, precise parts with fantastic physical properties.

Siraya Tech Fast Smokey Black resin has become a reliable and dependable choice for many users, thanks to its impressive array of features. Known for its durability and flexibility, this product offers clean and smooth results for a wide range of 3D printing applications. In addition, users appreciate the minimal odor, making it an excellent option for those with heightened sensitivity to strong smells. The resins robustness, combined with its slight flexibility, allows users to create intricate and complex designs without the fear of breakage. This makes it an ideal choice for both hobbyists and professionals alike. Furthermore, the Fast Smokey Black resin boasts a consistent performance, ensuring that users can expect the same level of quality from batch to batch. In conclusion, Siraya Tech Fast Smokey Black resin has proven itself to be a top contender in the 3D printing market. Its durability, flexibility, and minimal odor set it apart from other products in the field. As a result, it remains a go-to option for many satisfied customers who are looking for consistent quality and excellent results in their 3D printing endeavors.

Amazing quality

This resin is absolutely superb. I undertook a challenging 3D print job that consisted of very large pieces that needed precision to with interlocking gasket faces to be assembled. I tried several resins, but I was encountering multiple issues that resulted in print failures: separation from supports, drooping and distortion from the build plate, warping and bowing of the sides, and pitting from shrinkage. Basically nothing was turning out properly to my liking, and to get it even close required laying out a dense forest of supports just to get each print to hold on. And the stuff was soft and scratched easily even after curing. I switched to the Siraya Tech smoky black and the results are like night and day. Ive had virtually zero warping and distortion, and parts are fitting together with precision that exceeded my wildest expectations. Ive had zero print failures, and even am using significantly lower density of supports, which both saves on resin, and post print cleanup. In terms of cleanup, the resin sands, files, and polishes nicely, and the translucent color helps a bit with dry fitting prints. Id recommend wet sanding in order to keep down on dust. After curing, the resin is sturdy and decently scratch-resistant. It feels something similar to Lego plastic. Surface takes primer and paint well. Printing on a Saturn 2, exposure calibration was a breeze (2.5 seconds). Additionally with the plug-in air filter, and odor is minimal.