Siraya Tech Fast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing(Grey, 1kg)

Siraya Navy Grey is the best resin available for 3d printing miniatures. It shows incredible levels of detail, cures to a perfect matte finish, and doesn’t get brittle unlike most ABS-like resins I’ve used. This resin produces gorgeous, professional looking prints every time, at any layer thickness. Once you get your settings dialed in, you’ll never use another resin again. It costs a little more, but when you print with it you’ll know why.

I got this resin for a very special project of mine that I wanted to have high quality detail when completed. However, I run a small business, and because of unforeseen circumstances, I had to use the resin for work. Well, it saved me from being in a pickle for certain, and I’m grateful for that. But I admit while the detailing seems pretty nice, I’m not too crazy about the coloring (probably since I’m used to using a competitor brand). Also it was pretty liquidy which surprised me in all honesty. Other than that, I do think it’s a pretty good resin, I would buy it again, and it really saved me in a pinch!

Siraya Tech resin gives great results. Not brittle and prints are amazing.

This resin is the best Resin that I have used. Previously having used Anycubic eco clear, and an elegoo resin. No matter the settings my prints would fail, even when using the recommended settings from the manufacturer. This resin has a close to 100% success rate for me. I do get some layers of resin that seem to be printed as a half sheet. But that is most likely an error with my Anycubic Photon Zero, but cant be sure. Overall this is the resin I always recommend

Im pretty new to resin printing and Ive tried 5 different resins from different brands so far. This Sirayatech fast grey is far stronger and more flexible than the basic resins Ive used. The drawback to this is it can be a bit more difficult to remove supports, and must be printed with slower lift speeds than Ive achieved with other resins, its worth it for the added strength though. Holds detail very well, not quite as good as phrozen 4k, but better than Anycubic standard and standard+. For reference my perfect setting for accuracy on a photon M3 is 40um layer height 1.8s exposure, 3/3mm lift height 40/80mm/m lift speed, 80/40mm/m retract speed. 4 burn in layers at 24s exposure. Im working my way up on speeds, Im sure I can print faster, but the 180-240mm/s I was using with the phrozen resin failed and Ive only validated this one at slow speeds so far.

Anycubic photon mono 4k. 80% power, 3.0 seconds exposure. Started printing minis with anycubic basic gray resin. They were brittle and wouldnt survive a drop off the table it being shaken around in storage. This resin fixes that. Its easy to print, clean, and cure. Minis are still solid but have just enough flex to survive a fall of any height. I even threw one multiple times and it didnt break or lose a spear. Website states lower exposure times but that probably assuming youre 100% power. At 80% 3.0sec works great for me. 10/10 will buy again

This has become my go to resin for doing any quick prototyping that I do. It prints amazingly fast and I have had no print failures pushing the print times that werent my own fault.

Perfect little low speed drill for pinning minis. Make sure you make a small hole with something if what youre pinning is hard. Even though its slow, it can still skip off center.

Second time purchasing this resin, very easy to use

as long as your printer is halfway dialed in this is resin is my go to for ease of printing with the fewest fails but things that help are keeping it warm and making sure its stirred well