Straight Router Bit with Bearing, Wolfride 4PCS Flush Trim Template Router Bit 1/4-Inch Shank Top Bearing Pattern Router Bit

Just make sure the collar that secures the bearing is tight before you start using the bits.

bits are well constructed and cut nicely, but the 1/4 pattern bit is just over 3/8. Keep this in mind if actually using it for pattern routing, your template may be too thin for use with this.

I used the one router bit to mortise the sides of custom shelves I am making in my basement. I used the bit in conjunction with a homemade jig I made. It worked great. So far, the router bit did exactly what I needed it to do. After routing about 18 shelf slots in 1x8 pine, the bit is still sharp. You cant beat the price. A real value for the money.

Overall the router bits are good. They provide good clean cuts. My only problem was that the set screw in one of the bits came out after only a little bit of use. I grabbed the set screw from one of the other bits and continued on.

Used to cut hand holes in wood boxes using a cut template. Made each hole the same. Great tool. Saved me having to use the jigsaw 10 times.

This product arrived quicker than expected. Each bit was individually packaged in plastic housing for protection. For the money, the accuracy is spot on and the edges of the blades are holding up nicely.

While using the 1/2” bit on my first job in a piece of oak, the bearing disintegrated at 6 minutes. Now I’m stuck with a partially finished router job and I’m researching new bits. Should have realized that it was too good a deal to be true. Returning and looking for something else.

These bits look proper but as far as performance they fall short they butchered my materials and the bearing stop set screws vibrate out after a couple of uses they were sharp as butter knives definitely get what you pay for. Never again

These router bits are sharp and cut well. The one issue I have is that the set screw for the bearing collar is too tall and hits the workpiece. I was able to file it down to get enough clearance, but its annoying to have to do this.

If you need a cheap set of straight router bits for a job or two and don’t want to invest in a nicer set, this is for you. If you plan on using these consistently, they will dull and break. Upon initial purpose, they were sharper and performed better than expected.