T Phael Black Compatible Samsung Galaxy SM-T380 Touch Screen Glass Digitizer Replacement, for Tab A 8.0 2017 WiFi Version, NOT for LTE SM-T385(NO LCD) with Adhesive and Tools

The kit that arrives with the digitizer makes everything promising. Unfortunately, the digitizer was unresponsive when connected.

I had gotten a cheap used Samsung Tab A, TM-380 since I didnt want to spend full price for a tablet my kids use for movies while traveling. Sure enough, youngest daughter dropped the tablet face down and the screen shattered. This kit came with useful tools and a perfect fit glass screen replacement. Tips: Make sure you remove the plastic covers for the back button, home button and recent apps that are on the under side. Then MAKE SURE you are only removing the plastic cover of the adhesive on the underside. I originally started pealing the plastic cover AND the black adhesive. So I had carefully replace them both then very carefully grasp the plastic cover there protects the black tape. Honestly, place the screen was the easiest part.

It is just what I expected

Others mentioned the lack of adhesive. I first thought the same, but its there, already applied. If not *very* careful it will come off with the clear protective film. I needed to lift a corner, and use a razor to separate the film from the clear sheet, and slowly work it off. Once installed, there was a small defect visible, looks like a chip in the glass. I dont know if it came that way or if i accidentally did it. Lastly it comes with cleaning cloth and some install videos show cleaning the lcd or glass. Try really hard to not get any dust, lint, or breath near it. Cleaning it is quite hard and seemed to leave streaks worse than it was.

excelente product

Didnt work.

Works perfectly. Installs easily. Touch screen didnt work at first, then I opened it again and realized the connection wasnt pushed in all the way. Take note of how far the connection is pushed in before disconnecting broken screen. Make sure new connection is pushed in all the way. Not sure yet about long term adhesion. Heard of lots of after market screens cracking during installation. I didnt have an issue.

Replaced the broken screen on my Samsung Galaxy SM-T380. Getting the old one off was the hardest part. Once you get it off and cleaned up installing the new one was pretty simple. The adhesive strip came preinstalled and stuck good. I dont think this screen shows fingerprints as bad as the original. The I would definitely suggest watching a couple of videos on you tube on how to do it. Youre going to need a heat source to get the old one off. I used my heat gun and the tools that came with it. After a little work it came off without messing anything up.

Didnt work

It broke twice