Up Down Compression Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits CNC Spiral Bit with Nano Coating by EANOSIC

This bit is only used to produce repeatable results using a pattern attached to the workpiece as a guide. A bearing is used to follow the pattern and neither the process or this type of router bit are anything new. What sets this bit apart is that it cutting edges are slightly angled to slice both up and down. This results in a shearing cut rather than a chipping cut and should produce a smooth cut with little or no chip-out - well see. This is also a small diameter bit. Itll get into tighter areas, but its small size requires a bit more time and patience. You cant force this bit because its cutting tip speed is much slower than a bit of larger diameter. Both rotate at the same RPM, but the larger bit has to move faster around a larger circumstance. This little bit has the potential to produce edges ready for finish, but you cant rush it. Its also important to rough-cut work pieces very close to their finished size because you cant hog material with bits as small as this. This bit is for the last 1/8 give or take, youre not going to plow with it, at least not very far before it breaks from heat buildup. Use it as intended and with care and it shouldnt disappoint.

This is my second bit from Eanosic and just like my first one I am happy with it. It comes in a nice case for protection, and it is very sharp. It cuts material cleanly and the up down compression leaves nice edges on both the top and bottom as long as you set the bit up correctly. It is not meant to take much material off so you will need to use a bandsaw or jigsaw to cut away most of the material first. I only use it for pattern routing which is what it is meant for. Pay attention to the size of the material you are using because you may need to get a larger bit. I am using it for 3/4 material and it works great. Very happy with this bit.

Unreal quality for a great price. Leaves a great edge finish. No tear out or splinter. This is the 3rd brand of compression spiral I have tried and this one is far superior from the others. Used for several projects and havent seen any decline in the performance. Definitely recommend this product.

I used this bit for the first time to clean up the edges of a CNC carving. I purposely cut too shallow with the CNC into a piece of walnut, then cut the carving out with a jab saw. This to me provided the worst possible scenario I could come up with regarding the wood. Hard wood with jagged overhangs that have been stressed already, and a curved edge. As for the router, I used a cordless handheld DeWalt 1/4 in router. Its large in the hand so kinda hard to hold and it is easier to accidentally tilt than a larger router. Then I flushed the corners holding the router in one hand and the carving in the other. This was the worst possible scenario I was willing to tolerate. I got the best results I have ever gotten from any flush trim bit - with the worst conditions I could come up with. There was zero tearout, and perfect alignment. Look at the pictures, they speak for themselves. I hate to write gushing reviews, but this is a standout tool that radically outperforms every other version of the tool I have ever used. Cant recommend this bit highly enough.

EANOSIC Up-Down Compression Spiral Flush Trim Router Bit Versatile dual ball bearings allow for flush cutting as well as template use. The EANOSIC Up-Down Compression Spiral Flush Trim Router Bit is a versatile and durable tool for template cutting and flush cutting. The 1/4 inch shank and solid carbide construction make it suitable for a wide range of applications from hard and soft wood to plastic. The nano coating on the bit provides added durability and resistance to wear and tear. The unique feature of this router bit is its up-down compression design which helps to compress the material being cut, which results in a smooth and splinter-free finish. This saves a lot of sanding. This router bit is especially great for template cutting projects as it provides a precise and accurate cut every time, following the template perfectly. Exceptional value for the price. EANOSIC makes exceptional router/CNC bits!

The 1/4-inch Up Down Compression Spiral Flush Trim Router Bit performed well in my testing. The bit cuts fast and leaves a smooth surface. I tested the bit with 7/8-inch-thick air-dried Cherry wood. The bit performed as described.

This is well made, every bit as good as the more expensive Freud and Rockler bits I own. It comes in its own plastic case that closely matches the size of the bit for easy storage. It may seem trivial, but I store my bits in their original packaging, and the cases on Freud bits huge, so much bigger than the bit they hold, this case is perfect for how I like to store my bits. I haven’t used it enough to speak on its long term durability yet, but there are no red flags yet as far as the cut quality or craftsmanship is concerned. Recommended.

A spiral flush-trim bit such as this is a somewhat newish design that combines features and benefits of both upcut bits and downcut bits. And flush trim means that this bit is designed to follow a pattern along its bearing, to allow the material above the pattern to be cut flush to that pattern. You don’t want to ask a bit such as this to hog off much material; it’s forte is trimming small amounts smoothly even with sheet goods and areas of changing grain direction. So use your saw to cut close to the line, and this bit to just make that last 1/16” tight to the line and smooth. I can’t say that I have past experience with this company, but this bit does a nice job for a very good price and I would buy one of these again. I’ll update this if the bit seems to not hold up well! I hope this review has been helpful to you!

I have a triple fluted flush cut 1/4 inch router bit that I usually use in my construction business. I have never used a spiraled flush cut bit, so I thought it might be fun to try out. I used this spiraled flush cut bit it my trim router at first and the bit had no problems cutting 3/4 pine trim boards. However, I did notice that the cut was a little wavy because the trim router has a small base plate so I tried it in my full sized router with a 5ish plate. The cut came out much straighter and I would recommend using a bigger base plate for it unless it doesnt matter if there are a few waves in the cut. It cut through 5/8ths OSB plywood and didnt leave any burrs on the surface. There were some on the bottom of the plywood but I assume that is from the spiral moving downward. I like the fact that the bit is only 1/4 in diameter the whole length and that it doesnt have to take out as much material as my 1/4 fluted bit that is 1/2 at the cutting blades. So far... I really like this bit and am hoping that it stays sharp for a long time so I can use it for many years.

Bit works great, stays sharp