Western Digital 16TB WD Red Pro NAS Internal Hard Drive HDD - 7200 RPM, SATA 6 Gb/s, CMR, 256 MB Cache, 3.5 - WD161KFGX

The drives turned up and are running very happily in my NAS.

I purchased the 4T version for home PC with a windows operating system. I need this particular HDD because it is listed 7200RPM. I didnt meet any challenge when I installed other WD hard drives. It involved only a few clicks when I switched from WD 1T to 2T months ago, for example. I simply inserted the new disk into a USB case and cloned the entire disk in Minitool participation and got the job done. I was not lucky with this disk. It gave me so much trouble and wasted my two days to figure this out. First, sector size was different from my old 2t WD Blue drive thus I couldnt clone it directly. Because the target drive was not the main OS drive so I decided to simply copy all the folders into the new HDD and switch the two. Then I used Minitool to format it. It refused the command, software reported error. I then tried all other software including the one recommended on WD website (Acronis True Image for Western Digital). I finally got it done by using EaseUS. I formatted it and copied all folders from the old disk and switched it with the old internal disk. When I opened windows, none of the partitions created in EaseUS showed up. HDD showed up in BIOS menu so I knew it was there. I googled answer to this problem, read all articles to educate myself. Checked Manage disk in OS and realized one of the partitions was listed as GPT protective partition. I then followed the article published on Seagate website (ironic) and cleaned the entire disk using diskpat command. All data were removed. I returned to day 1. If your partition software doesnt work in Windows, check whether this disk is GPT protective in disk management. Dont repeat my mistake. I am glad I didnt do anything harmful to the old drive thus I spent the second day repeating what I did before, copy and paste. Now the new drive works and it works faster than old WD blue 2T. It is quite noisy but not scary. I am satisfied with the product so far but I hope WD can improve the product to meet various needs from customers. I am not a tech guy but switching HDD shouldnt be so difficult and time-consuming, thus I removed one star (should have been two stars when I felt frustrated yesterday).

Cumple con lo indicado

Drives are fine as long as they are consistently running, but they get noisy going from sleep mode and back. I am using in a personal raid 1 archive and they work great, but these drives are made more for a server array.

Excellent, and got these at a great price too.

Ordered four of the 18tb drives. Two arrived in opened retaped Newegg boxes with the drives loosely in the boxes and two arrived in what appears to be from WD. See pic…. Hope the two from Newegg don’t have problems in the future from be banged around…. I know there was just an issue with Newegg reselling returned/defective merchandise. These look as if they qualify……

These took under a minute each to install into my Synology DS920+ NAS. Since it was all new gear, I let it do a through drive check as part of initializing which took a long time. I think it may ave been about two days. In theory, I could have used it during this time, but I just started it and ignored it. During installation, the 920 whines about any accessories (memory, drives) that arent Synologys own and that included these. On the 922, they change from whining to much more obnoxious contrived incompatibilities, but this combination was chosen because exactly once, during insteallation, it warns you that its not a supported combination and thats that. Probably if there were a support issue involving data loss, theyd remind you of that oath you took to not complain, but in reality this is a very common combination that works quite well. Fan and normal noise is quite minimal. There was a noticeable clunk during a head seek. I reduced this by offlining the unit so I could remove power then applying the fuzzy half of a hook-and-loop fastener to the bottom of the bottom rail. That gave it support and a little bit of padding so the metal cage didnt serve as a drum skin for the oh-so-tiny motion that got amplified when transferred to the sheet metal. Im looking forward to getting many, many years from these drives, like I did from the 4TB WD these are replacing. Those drives have no reading errors. Size grows and no drives are infallible, so I opted to replace them on my schedule (OK, and on Amazon Day special. :-) ) instead of letting the drive pick its own replacement day, taking my data with it.

I installed these drives into a Dell PowerEdge R210 II and they are working flawlessly so far. Its been a week. They are running in an Unraid server. I was thinking that they may need jumpers set to support 3Gbps SATA settings, but they worked magically out of the box.