Wireless HDMI Transmitter and Receiver,Wireless HDMI Extender Kit,@30HzWireless HDMI Extender Dongle Adapter, Plug & Play,Support 2.4/5GHz for Streaming Video/Audio/Documents from Laptop
-
Brooke
> 3 dayTook me a while to get this connected to my modem. Once connected does extend wifi and strengthens throughout the house.
-
Jim B.
> 3 dayI tried this and there was a delay and it would freeze up. Sent it back
-
Royce
Greater than one weekEasy enough on the hardware side, couldnt get my computer to connect to the receiver or TV. When I plugged in the transmitter through the HDMI port of my computer, all it did was keep shrinking the screen and beeping. Tried to connect to the IP and then receiver through the WiFi and nothing. Gave up.
-
A. E.
> 3 dayOverall it works plug-n-play, and does more or less what it says it does. Connect the small dongle to a computer or other HDMI video source, connect the larger receiver to a monitor and you get audio/video transmission. Its okay for some uses. I wouldnt use it for anything permanent, but something like presenting from a laptop seems an okay use for this. A few negatives: - I couldnt get it to work at 4K yet. May just be something related to my specific devices. Apparently it would only be 30Hz refresh rate anyway, which can look super-choppy, but it says it connected for me at 1080p/60Hz. Even though it says its running at 60Hz, Im not convinced it actually shows 60 frames per second as it looks choppier to me, however its good enough for most videos to look okay. - A small delay until the feed reaches the receiver device, noticeable when you do something like move the mouse. Again, okay for videos, but I wouldnt use it for anything much more interactive, like gaming. - HDMI cable on both sides is pretty short. Could be more of a problem on the receiver side, since it might not let you place the receiver in a good spot. - No included power adapter for the receiver, just a USB-C to A cable, so you will need a power source. - The transmitter gets quite hot.
-
Candice
> 3 dayCould not get this product to work.
-
sk8nj
Greater than one weekThis product is very easy to use. Setup is simple and in most cases Im sure it works great. Particularly with remotely playing videos and whatnot. Or using it as a means of a screen share. My intent was a little more involved and I wanted to use it for gaming on my TV from my laptop. Everything was going smooth until I actually attempted to play a game. Thats when you notice the deficiency in the product. I had attempted a few different games and the results were the same for all. The video lag was atrocious. The motion blur made games impossible to play effectively. The delay between actions and response on the screen was pretty long. If youre looking for a means to cut out the HDMI wires to a display, and you have no intent of doing anything graphically intense, such as gaming, this product works great. If your intent is to use it for gaming purposes, you may want to stick to wired.
For Apple system
Firstly,use the cellphone to connect the transmitter WIFI which name "RX-xxxxxx",Password:12345678.
Secondly,enter the "192.168.203.1"and search on the browser.
Finally, go to "Setting" and click "Resolution" and choose "3840*2160".
For Android system
Step 1,Click WIFI on the phone settings page,find and connect the Mira Screen device(Name:RX-xxxxxx,Password:12345678).
Step 2,Enter 192.168.203.1 in your mobile phone/tablet browser.
Step 3,Go to "Setting" and click "Resolution" and choose "3840*2160 30P".
Step 4,Click on the internet and connect the home router WIFI.
[Wireless transmission]
The receiver adopts HDMI+VGA dual port,By using WiFi transmission technology and through the point-to-point connection between transmitter and receiver equipment, which makes the image/video of MAC, laptop, PC, phone and set top box synchronize to HDTV, projector or monitor.
Use 5V2A adapter to connect the transmitter in these 2 situations:
1.When the computer was low power
2.The current for HDMI imports is lower on some computer, the power light on the transmitter will be weak or extinguished, please use the type c cable to support the transmitter.
Installation steps：
Step 1: Plug the transmitter into the HDMI or VGA port of your device (laptop, PC, satellite box, game console)
Step 2: Connect the receiver to the desired screen through the HDMI or VGA port (You need to prepare Type-C cable and 5V/2A charger for the receiver), then press the play button.
Dual Antenna Design
Dual antenna, support 5G high speed. long signal range up to 98ft / 30M away.
Transmits through walls,floors & ceilings(*NOTE: Signal distance is reduced when working through walls.)
The receiver has HDMI , VGA ,Audio ports. can support external audio.
Multiple interfaces
The receiver adopts HDMI+VGA dual port,By using WiFi transmission technology and through the point-to-point connection between transmitter and receiver equipment.
Easily start mirroring transmission after connected, simple and efficient operation
|
|
|
|
|---|---|---|
Say Goodbye to Messy CablesEnjoy a clear picture from small to large screens with virtually no delay and smoothly. Avoid the hassle of using multiple HDMI cables to connect devices in your TV room or office. |
Switch Between Multiple DevicesConnect the transmitter (TX) to the HDMI port of your computer,Connect the power,run the driver program to start mirroring.(When the computer was low power, You need to prepare Type-C cable and 5V/2A charger for thetransmitter ) |
One-Touch Disconnect ＆ ReconnectA button on the transmitter supports quick disconnect or reconnect to your device. Easily protect your private content. |
|
|
|
|---|---|---|
| Wireless HDMI Transmitter and Receiver,Wireless HDMI Extender Kit | Wireless HDMI Display Dongle Adapter | |
| Connector Type | Wireless HDMI | Wireless HDMI |
