Woolwax Pro Undercoating Gun by Kellsport

way better than the fluid film sprayer. This things in amazing

Perfect spray gun for the NAS Fluid Film. It’s all metal with no plastic parts. I added a regulator and a 360 degree swivel and made spraying that much easier. The pro is worth it because it comes with the plastic hoses to get in to the hard reach spots.

The gun works well as long as you follow the directions that come with the kit. You do not want to thread the nozzles all the way on. If you do, it wont release any product. Just 3 to 5 turns and it works fine. I ran about 80 psi & the atomization of the fluid was very good. If you run too low a pressure the product tends to dribble more than spray. Definitely worth the money. Lastly, be careful with the gun, it is made out of a cast material & might crack on you if bang it hard on your vehicles frame or you drop it on concrete.

I’ve sprayed LPS 3 through it, both with the nozzle & extension tube to get inside body panels. It works great.

Here is the deal. If you are serious about Fluid Film, you have to have this Pro Gun. The cheap gun that comes from the Buy two gallons, get a spray gun is decent but waste a lot of product. This gun lays it on nice an evenly. The wands or priceless and get into those areas a standard Harbor Freight air gun wont reach. The gun itself seems nicely built and just takes a little to figure out the adjustable tip. Once you do, you will be laying it on like a professional. Final thought, if you are on the fence about laying down $95.00 for this gun (like I was) you wont regret it if you buy it.

I used this with fluid film to undercoat my car for winter. It worked great and I had no isssues spraying for several hours. I would definitely recommend this product!

I use this with black fluid film and so should you. This makes it like cheating. I feel like I’m painting art on my truck frame. Get your air compressor just right and it’s like a wet brush. Stop paying a shop 200 and more per vehicle and do it yourself

Works great....the spray nozzles alow complete coverage. A must have.

Works well. Works better if the fluid is warm. Thins it out a bit.

For the price you can’t go wrong. Worked as I hoped it would. Used for fluid filming my vehicles. Read directions!! The tip is meant to be loose. The looser you operate it the more material comes out. It won’t leak because it is loose. Mine operate best at 80-90 Psi.