Yamation DTF Powder Adhesive White 500g / 1.1lb DTF Transfer Powder Hot Melt Adhesive applies to All DTF Transfer Printers for Digital Prints on T-Shirts Textile DTF Supply with DTF PET Film and Ink

The powder gets used with DTF print sheets and if you have a DTF printer or Sublimation Ink then this will work. You can use other materials like cotton to design shirts, or bags. In the above picture you can see my first attempt at using this with my sublimation ink, on some material. I am so excited to make some cotton shirts with this process and so far am happy with the results. I have also washed this twice and it looks amazing still. But let me be clear you need to have a sublimation ink printer or a DTF printer to use.

Everything came out special!!

after I heat pressed it on, I had my doubts. I looked like it had a heather shirt look...grainy. After one wash , it looked horrible!! Wont be buying again. UPDATED REVIEW: The powder works GREAT. Do not use for sublimation, like many of the posts have written. Works great with DTF ink and oven. Will definitely be ordering again!!

Excelente se ve genial 100% recomendado.

DTF allows you to add your design to a large variety of projects. Unlike sublimation where you can only use high polyester count items. The powder will need to be cured and once that is done it is set to place on your garment. It will not take long for the adhesive to stick to your project. The recommended temps were 266-302 degrees F, 10-15 seconds. Peel off slowly. This has been my go to powder. I have used it with various brands of film.