YOTOO Hybrid Air Hose 1/2-Inch I.D. by 50-Feet Long 3/8 inch MNPT Solid Brass Fittings 300 PSI Heavy Duty, Lightweight, Kink Resistant with 3/8 and 1/4 Industrial Quick Coupler Connectors, Gray

I have yet to put this to use, I need to change fittings on compressor and my dryer system to use this larger hose. Since winter and do not use my shop very often in winter, will wait until spring to make those changes, things work fine for now. Everything had 3/8 fittings, so need 1 set to make this work for me. Look to be same size as what is used on my plow rig to quick release the hydraulics, so might have spare set if really looked around. I built a dryer system out of PVC with 4 drops to drain and few different regulators in place, and this feed hose will connect from compressor to that system.

Have not used it. Enables me to discard old hose which leaked at fitting .

Hose came ready to use with quick connect fittings already attached.....one extra male and female quick connector fittings and two extender fittings and threading tape....very good material used on hose ....4 stars

The YOTOO Hybrid Lead-in Air Hose 1/2-Inch by 6-Feet is the perfect length to connect the air compressor to the filter. The 1/2 inch size can move a lot of air. The 6 foot length allows me to move the compressor a little and it avoids a lot of extra hose. This hose is perfect for the situation I ordered it for.

Connected this hose to my tank of Nitrogen and set output to 200 PSI and have no issues holding that pressure

Durable air hose and it came with different size fittings which was very helpful since I changed mine out. Also came with a roll of Teflon tape

This is an industrial strength air hose! It is used in larger sized, usually commercial, air supply systems. So it is not going to be compatible with the typical 3/8 inch diameter hose fittings. It can be useful as an intermediate between an air source and a retractable hose reel for instance. That is the application I chose it for. The YOTOO Lead-In 1/2 Inch by Six Foot Air Hose is very well-made and should last a long time without worries! Both ends are encased in kink-proof and abrasion resistant strain reliefs. The fittings are well-made and function flawlessly. Very Impressed!

We use this hose on a reel in our work trailer. We build custom artwork crates and use this on the daily. During the work week. So far so good.

If you have need of a 1/2 inch short 6 feet air hose this one is constructed very well. Nice fittings and materials all around. Have had no leaks since putting this into use.

I like that this product is well made and quality materials. It says right on the item that it is for 300psi max. I checked the ends and connected and reconnected the fittings many times and had zero issues.