10-Piece Hole Saw Kit for Wood | Durable Carbon Steel Power Drill Hole Cutter with High Precision Cutting Teeth – Woodworking HCS Hole Saw Kit for Wood, PVC, Plastic, Drywall

Dont count on this to cut a hole in a precise location, or to have the hole cleanly cut, as the drill bit doesnt necessarily center the round cutting blade - if you can get the round cutting blade to even seat upon that bit at all. The first hole blade I tried to use wouldnt seat because its cutout hole was off center. It is unusable. The second one I tried could be bolted on, but wouldnt turn evenly in the drill. Instead it wobbled back and forth even when it was properly tightened in a drill that could handle every other bit its ever taken. But that was sufficient for cutting the hole I needed at that moment. I dont know if any of the other hole bits will work for my purposes. This was certainly inexpensive - and if your expectations are low, it may work for you. Its definitely NOT High Precision (as advertised.) For a birdhouse hole, a bird probably wont care if its off-kilter. But if youre cutting a hole where it matters, you might want to spend a little more and go with something better.

Exactly as described.

just what I needed for a project

I tried to use this for the first time yesterday. I cant use the smallest hole cutter. The bit/mandril that comes with the set is thick. When you put it into the smaller of the two shanks, the small hex screw wont tighten flush. Consequently, the smaller hole cutters wont fit. The non-flush screw prevents the hole cutter from fitting onto the shank. The smaller hole cutters dont fit onto the larger shank. I tried using a smaller bit from my tools, but that didnt work. This would be a great set if it had a thinner bit for the smaller cutters.

There are no directions for first time users. They are not very sharp so took quite a while to get through the wood. Leaves the wood very chipped around the hole. I am not experienced enough to know if thats normal. It came quickly from the seller.

Broke after drilling the 3rd (2 1/2) inch hole. Metal that holds the middle but stripped out. Guess I’ll go to Home Depot for a replacement.

Metal is too thin and bends. Used the 2.5 to make a hole in 1 plywood and saw shank bent making the saw teeth not flat against the board. Then the shank ripped through the flat portions that keep the saw from rotating around the shank, becoming useless. I didnt even finish the first hole I was cutting. Next up I tried putting the drill bit in the small arbor to use the 1 hole saw. The set screw sticks out enough to interfere with the locking nut making everything uneven and unbalanced. Totally useless.

Easy to use. Cut through easily enough

Im confused on the negative comments. For the price, what do you want? Ive probably have two or three of these drill sets over the years. Why I keep losing them I have no idea, but this set is every bit as good or better. I had a lot of holes to cut and the first cut was as smooth as the last. As a suggestion, dont ever smoke them. Take your time cutting the holes, pulling out the blade and blowing out the sawdust a few times. Takes a few seconds more but a lot less wear and tear. I have no problem with the quality.

I bought this to cut holes in my mirror so that I can put lights threw it in the back to make a vanity and I thought my mirror was wood and it was not wood it was plastic! and it worked on plastic I drilled 20 wholes about 2 inches wide and the Mirror did not break! great Product and I’m excited about it because it comes with different sizes so I’ll definitely be using it again and the price is great you go to Home Depot and just for one of the adapted sizes you have to give $40 not including the thing that needs to connect to the drill so this is a great buy. also are used it on wood to practice like a plain thick wood and it totally works that’s how I practice before I did it on the actual mirror.