













1.25/2.5/5/10G SFP+ RJ45 Copper Transceiver, 10GBase-T RJ-45 SFP+ Module, Compatible for Cisco SFP-10G-T-S, Ubiquiti UniFi UF-RJ45-10G, Mikrotik, Fortinet, Netgear, TP-Link (CAT.6a/CAT7, 30m), Ipolex
-
myProfile
> 24 hourCame in a nice little metal case I can use for something else.
-
Cesar M.
> 24 hourWorked as expected.
-
SamS
> 24 hourHad an issue with one that was dropping packets and had to return for a replacement, but otherwise, these adapters have worked excellent. They do get hot if you use them in a switch that doesnt have good ventilation, but either way, they work very well. I am currently using them in a Brocade switch and with SolarFlare network cards, and its working very well.
-
Brad Murray
> 24 hourI connected the module to a mikrotik CSS610, with the other side on an Asus Z690 MB that supports 2.5GBE. With no additional configuration, both sides auto-negotiated at 2.5G.
-
Yuriy
> 24 hourWoks good with ER4 router
-
Dave
> 24 hourI havent tested this working, but it definitely doesnt work with an intel x520-sr2 ( 82599ES ) It doesnt work with my TL-SX3008F either, despite claiming to work with TP-link devices. The transceivers that came with my intel x520 worked with the switch fine. I even bought 2 of these and tried both, when I connect them to my intel card, the driver crashes.
-
LK
> 24 hourNeeded a couple of these to extend network with a downlink between two UniFi switches. Excellent price and received them quick. Link has been up for about 2 weeks now with no problems!
-
darcagn
> 24 hourPicked up a used Aruba S2500-24T for $50 and paired it with this transceiver. Works great. Enabled jumbo frames on my equipment and this NIC and Im getting 9.89 gigabits to my home server in iperf3. Im happy.
-
KT
> 24 hourDoes the job and negotiated at 2.5Gb on my Ubiquiti gear that doesnt officially support 2.5.
-
alan
> 24 hourbetween the Mikrotik S+RJ10, Wiitek, and this..this one was the most stable. tested in a Mikrotik crs328.