3 inch Swivel Caster Wheels, Heavy Duty Plate Casters with no Brakes Total Capacity 1000lbs (Pack of 4)

I ordered these months ago for a shop project. I took a quick glance in the box and it looked good. Sadly when I went to install them today there were only 3 actually in the box. I should have looked closer when I got them...but I also shouldnt have to verify.

These are heavy duty swivel wheels for a trunk or chest. Other uses apply as well. For a wood trunk, it makes it easier to move along any floor. I like these. I would buy again. I recommend this to anyone. Would work great on a display cabinet. Just mount them correctly and use a heavy fastener. It will last a life time.

I got lucky and picked the right ones is all I can say. There are products that are subpar but these have done their job. I constructed a cart for a outboard motor and used these wheels for movement. They are awesome and your money is spent well.

They worked on may QSC Subwoofer.

Love them

Fitted them to a workbench and they are sturdy and strong. Highly recommended.

At time of my purchase of these, the hole pattern in product pics was shown to be 1.7X2.5in on centers of slots. Slot dimensions shown as 0.3x0.4in. Actual hole pattern is 1.76X2.88in. Actual slot size is .33X.47in. This means that the 2.5in shown in pics is actually the ~minimum dimension between slots. So if you designed mating parts to that 2.5in center shown in pics, installing the fasteners is impossible. To the person that measured the parts for the product pics: Good job! You almost got it! Keep trying, one day youll finally read that tape measure correctly, and then theyll be no limit to what you cant do! Otherwise, these seem to be as advertised.

Very nice, even came with bolts to mount.

I have bought these for a custom made mobile base I built for Kobalt 12 inch slider mitre saw. Roll smooth as silk, lock-down is rock solid. Even though all 4 lock, I can lock any 2 and it does not move. The total (or two-way) locks work as described. The casters do not roll or swivel when engaged. Not even a fraction of an inch! I purchased additional 5/16x1 lag bolts and attached to 3/4 plywood blocks which were glued and screwed to bottom of plywood base frame. I can now roll this around on my concrete garage floor. Weight of the Saw drill press and sander and base is 130-140 lbs.

Used these wheels to mount a carpentry workstation. Fit the bill perfectly. Smooth both rolling and swiveling. Easy to mount. Strong.