8mm OD 20mm Long Light Load Compression Mould Die Spring Yellow Compression Mould Die Spring for The Ender 3s Bed 20pcs

They are a great upgrade to my ender 3 v2 bed

Immediately noticed the difference compared to stock springs. On an Ender 3 V2, it needed to be levelled every single print. I go many prints without needing to re-level. I am only really re-levelling now when I swap materials, or removing the build plate for cleaning etc.

Well constructed looks quite durable.

Significantly more tension than stock ender 3 springs. Also shed light on print quality issues I was having. I had minor z banding and basically rebuilt the entire machine. Changed wheels, z rod, coupler, brass nut, types of lube, resquared the frame on the z, almost rebuilt it from scratch and print quality remained the same. Tried these springs.... bed much more stable and z banding only noticeable at the right reflective angle and under a microscope. Now z banding has been traced to direction changes on different layers so I’m guessing nozzle quality now to make it absolutely perfect. Long story short (too late I know) excellent for me so far. May try the red and blue springs if I get ocd again but for now I’m very satisfied.

I got these as a small, inexpensive upgrade for my Ender 3 3D printer and they work perfectly. The stock springs that came with my printer werent exactly bad, but after receiving these I noticed that theyre much stiffer than my original springs; making my print bed much more stable while printing. I would highly recommend these as a small purchase if you own a 3D printer with springs on the print bed such as the Ender 3! Pros: - They couldnt be easier to install! Unscrew the adjustment knobs from the bottom of your print bed and replace those springs with these new ones. Screw the adjustment knobs back into the print bed with these new springs and youre done! Level your bed and keep on printing! :D - Theyre yellow. That could be a pro or a con depending on your preference, but it gives the printer a little more of a performance look to it, in my opinion. It makes the Ender 3 look a little more intricate at the very least. Cons: - Nothing. I got 20 springs in a small bag and they work perfectly for my purpose! I will definitely be buying these again if Im in need of more springs for my printer!

I am confused by all the other reviews stating these worked well with their ender 3 v2 printer. I was excited to install these, but even at full compression they are simply too long, and the bed is not able to go low enough without contacting the nozzle at the home position. I tightened down the leveling knobs all the way to where the coils of the springs were completely touching and could not go any more. I still needed the bed to go about 1-2 mm lower. I still plan to use these and just cut off one or two coils. They are much stronger, and seem like they would work well, just frustrated they advertise they fit the Ender 3 V2 when they didn’t fit my stock setup. It may have to do with the bed surface thickness you are using. I am using the textured glass bed that comes with the printer. If you have a thinner bed surface these may work fine.

No cutting needed for fitment on Ender 3 v2. Easy to install.

These are way stronger then the original springs I was using. Perfect for not loosing there size under pressure.

Used on my Ender 3 pros print bend. Stronger and steadier than the stock ones. Highly recommend the upgrade.

Watched a video on leveling my ender 3 bed and the guy suggested these! So happy with them!! Way better than the ones that come with the machine!