AC Infinity AIRCOM S10, Quiet Cooling Blower Fan System 17 Front-Exhaust for Receivers, Amps, DVR, AV Cabinet Components

Just what I was looking for, exhausts heat from my Denon receiver out the front.

I must say the unit does a good job of keeping my old (2000) Harmon/Kardon AVR 310 amplifier cool. I have only had it on the Amp. for two days but it works as described. I leave it on the smart mode meaning the unit will kick on at different speeds as the temp. requires and it will kick off when it senses a low temp. So far so good. At this point I would buy it again.

Quiet, yes, but there is some fan noise of course. For me thats OK because the amp is in another room from the speakers. I like the sleek, black design which fits the space perfectly and seems to do the job.

AV components are prone to failure due to overheating especially in poorly ventilated media cabinets. We recently purchased a new media cabinet that forced me to need front exhaust the hot air. The AC Infinity S10 was the perfect solution at a very reasonable price. Plus in Smart Mode the unit automatically adjust the speed the longer the AV unit is on. Its also super quiet. I love the flexibility to place another component on top (if needed). I am super happy with this purchase.

Got this to keep a Denon tuner cool in a tight space. Works as expected and has stopped the overheating issue. Very quiet.

System works, well made construction, and is very quiet. However, I feel they should have options for units to move Higher volume of air, 250 CFM+ to use in a rack/equipment closet for big amps for front exhaust. In equipment closet 4x7, I have an open 72u skelton rack—no sides or back. Cool air flows in from back side and there is exhaust system in front of rack at ceiling to pullout hot air out of the room. I did this approach for front exhaust to have since all the wires in back would interfere with air flow and want to get the heat out as fast as possible. I use a S10 on top of processor and one S10 on top of Monolith 7 Amp which is stacked on top of another Monolith 7 Amp—amps are on separate shelves with about 1.5 inch space between them. Thus, have top to bottom S10, processor, S10, amp, amp.—. All this takes up bottom of rack. Top half of rack is used for UPS, media devices, automation, etc. I use the smart mode on both S10 and both turn on and ramp as per independent temperature measurements. I am still taking temperature measurements on the bottom amp to see if I need another S10 to keep it cool.

I am using this on a Marantz SR6012 Receiver that runs HOT! Keeping fingers on top of the unit for more than a few seconds is painful. With the S10, at its lowest speed, the receiver is barely warm even after several hours of use. Set the speed, put it on auto and you are good.

This is the best product I have come across which works perfectly as described. Very less noise at full speed and does an awesome job. Great quality which lasts long

Very quiet running and works well to circulate air

very nuice works good