ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Grey, 1kg)

First resin I tried that wasnt produced from the company that made my machine. Im not sure if my critique is base from inexperience or happenstance, but this resin seems to be better than what I was using. The detail seems good, it seems to leave no extra resin boogers in the vat and it left very little resin excess in the tub that I use to alcohol clean the model. The only downside is the fumes. The previous resin fumes were contained in the machine by the cover alone, this stuff seems to blast past that and permeate through doors....

Haven’t had any problems since I finally have the perfect settings for it now so my prints come out perfect now

I get the same resin every time, started getting it delivered monthly.

I haven’t had to do anything but level the bed. The test print is perfect and the other items printed well.

Anycubic resin is still probably best resin per dollar I have found. Its not perfect resin but it is also not bad in any area. I normally mix 50/50 with my preferenced brand to get better over all prints. I would just advise to by any anycubic items through Amazon. They have the worst customer service on the planet, and alteast ordering here will provide you some protections.

Projects come out well & detailed. I have only painted one of the projects so far & it seems to take the paint well (used miniature model paints).

Title says it all. Prints nicely, sticks to build plate well, nice fidelity to resolution. However, it isnt opaque (hollowed out model), and is really a pain to clean. Requires lots of alcohol to clean the model, and unfortunately, the alcohol seems to soften some surface details too.

I have had 0 problems printing the the Clear anycubic resin on my ELEGOO Saturn 2. It did yellow on beefy parts so just be warned I’m not sure if that’s a setting on resin specific!

This prints perfectly almost every time I use it. My only complaints are that its stench is godawful and its brittle. I mean it will instantly stink up a room within the first 30 minutes of starting a print. The prints themselves are also extraordinarily brittle, but thats to be expected from non-abs or even non-additive mixes. My recommendation? If youre going to get this, add something with flex to it so the prints wont shatter if you look at them wrong.

This is my first go at this resin printing. Im still working on the settings of the machine. This resin seemed to go quite a ways. I bought another bottle 1000kg of the water washable to try out. Id buy this again though.