Cooler Master NR200P MAX SFF Small Form Factor Mini-ITX Case, Custom 280mm AIO, 850W SFX Gold PSU, Triple-slot Vertical Mount GPU, PCIe Gen4 Riser, Tempered Glass or Vented Panel (NR200P-MCNN85-SL0)

Ive built dozens of sff computers and I love this case. I 3D printed a modified ATX holder and use an ATX power supply. You can download the print files on cooler master website. I painted the case to go along with a Halo theme and it was extremely easy to take the panels off. Good quality all around. I went with the vertical mount option to compensate for the atx power supply and it works great. Only issue you may run into with this setup is cooling. So far so good, Im running a Ryzen 5600x with a low profile cooler and a 3060ti. Temps are good but if I was running a 5900x and 3080ti the temps may get pretty hot. In all I will but this case again. Looks awesome.

I have the white version of this case too. This Unit comes with some decent fans . Tons of options on this case. It is sturdy and the paint job is very good. Excellent case for an itx unit. Pretty much tooless as far as removing the panels . Oh and the instructions are straightforward ( A nice surprise) One small issue you may have is that your cables are visible if you chose the glass panel but not a deal breaker

This is without a doubt the best approach to a case that can house full form factor, ATX size components without compromise. In current I am running a i9-9900k at 5.1 ghz, cooled by a nzxt x63 280 mm radiator. The temperatures of the CPU top out at about 70 C and the fans are dead silent. Mounted in the rear portion is a gigantic evga rtx 3080 ftw3 that takes up every bit of space spare a tiny bit in the front for airflow. The temperatures here are not amazing, but for a mini itx, 80-Ish C is quite acceptable. The fans do have to rev up and is a little noisy, but nothing to worry about, even with desktop speakers. You won’t be bothered unless you are a “everything must be dead silent “ enthusiast. I recommend getting a strip of poly foam to place between the case interior, bottom shelf, and rear of the graphics card to tone down gpu sag. It’s likely not an issue, but for me, I bought mini itx to enjoy moving it to LAN parties; the extra protection guarantees you won’t mess up your multi thousand dollar investment. Overall I find the clean, led-less build to be extremely satisfying, much nice to have extra desk space for the giant aw3418 ultra wide that sits next to it. The build IS tough, though. I sent a few hours putting it together iteratively as cable management was tricky. An after market braided cable set will likely make this easier, so if you don’t mind spending an extra 50 dollars, do it. Well done and bravo Cooler Master.

I purchased this case with the intent to downsize from a full tower NZXT Phantom. For those who want an estimate on the size difference, this case is roughly 1/4 the volume of the NZXT case mentioned above. The effort towards building in this case was a tedious and extensive process. I ended up using EVERY feature on this case such as the side mount GPU bracket for an extra USB card and fitting a m.2 to PCIe x4 adapter on the bottom slot for a capture card. I even managed an EK AIO 240 as well into this case! After all of that, I have never had a smoother and cooler system despite the size of the case. Pros: 1. Up to 5 expansion slots (2 slots are optional for side mounted for GPUs) 2. 5 side venting 3. 3 magnetic dust filters and fine pitch top grate 4. AIO liquid cooling mounting bracket 5. Compatible with triple(3) slotted GPUs 6. Simple yet effective design Cons: 1. Difficult to build in 2. Spacing between back of front panel and PSU slightly too short for larger HDDs (It could really expand on the ability of this if it had that extra 2 mm) 3. Easy SSD mount screws dont seem to fit the threading of some older SSDs?(not confirmed) Conclusion: TLDR: The quick fast easy answer to this is that this case is amazing but its hard to build in. I would not suggest anyone get this case unless they either have very little going into their system or they have an expert they can call to assemble this system. Assembly Notes: This case provided a large amount of different screws mostly all in the same thread, size and type. It also comes with two different size fans, two fan grills, and a handful of zip ties for cable management. I ended up using every feature of this case I could and still had quite a few parts left over in case I were to lose something in the future. If you are one who wants to use the AIO Cooler features of this case a note, I had to flip my case on its side to make sure the pump pushed all of the air bubbles to the reservoir before setting it on its feet again. You technically cannot mount a large HDD in this with a 240mm radiator as well. Final Thoughts: I absolutely love this case for everything I managed to fit into it. If you or a build expert you may know are up for the challenge, its a really fun but tedious build. The end results are worth it as far as cooling and size goes. I strongly recommend this case.

Its so easy to do a build in this case. It looks amazing. Keeps the dust out really well. You can fit full-sized cards in it. Highly recommend.

Great build quality and fairly easy to install. Its still a little cramped but that just comes with the form factor. The unit is also very quiet and I really like the optional side panel.

So far I only have my fans and power supply in and I love this case. Super easy so far well see when I get to the GPU.

Great case! Easy to build in, accommodates lots of different hardware, and excellent cooling! I bought the NR200P vs the NR200 specifically to vertically mount my GPU with a bottom mounted AIO radiator based on Cooler Master product photos I saw of that configuration. However, only after purchasing did I find out PC building experts warn against bottom mounting AIOs, so I never used the vertical GPU mount or glass panel, they just sit in a closet. Side mounted the radiator instead which is ok, but arguably less visually appealing. If you want to vertically mount your GPU, better to get the NR200 MAX now that it’s available or just get a normal NR200. Don’t really see use of “P” model unless you air cool your CPU.

Overall, the case is amazing. The materials are solid and the finish is beautiful. That being said, this case needs to be sold as a bare-bone. My included psu has really bad coil whine when gaming. (Used a mechanics stethoscope to very it was psu and not gpu). Not to mention that many new cards are recommending 1000w PSUs. I love the layout of this version over the standard nr200p. I had to change out the included fans with some Noctua ones and set them as intakes. Also added slim Noctua fans to the bottom as an exhaust. My Ryzen 7700x and RX6800xt both stay in the 50s to low 60s when gaming. If it wasn’t for the PSU coil whine and the price, this would be a 5 star review. Which is the other point. This case would be the best itx case on the market at $349, which is what it was originally rumored to be at. Over $400 is just insane for this, especially with the poor PSU choice. I would still recommend the case, it just needs to be released as a bare-bones at $120-$149

This is hands down the most flexible and easy to use mini itx case for the beginners and the experts. It is such a joy to work in this case to fit your built. I have a 240aio and a full size gpu in there. Replaced all the fans with a low profile 120mm fans. You get plenty of cooling from all the vented panels with mesh all around the case. The case looks good and easy to transport or move anywhere. If you are somebody that just like small case and want to have a small footprint for a pc this is a bagger or even someone who want a pc and like to travel around. This is really such a great case for the price,