Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8, 1/4, 3/8, 1/2, 3/4 and 1 in Wooden Case

Fantastic & able to tap 1/2 & 3/4 pvc for threaded fitting in the side of 6 pvc

Works good for soft metals for making new threads

These work great and come in a nice wood box for storage

I only needed a 1 inch tap for a plumbing repair but the price for this whole set was similar to just a single one inch tap at a local big box store. I used it to clean out corroded threads in a galvanized in-ground fitting so I could replace a broken section of water line. It did the trick, is still sharp, and saved me from a bunch more digging. Thanks!

I need to cut threads a bit farther in 3/4 cast iron pipe clamps (Pony brand). Wore down on first use. These dies are constructed of carbon steel and it turns out I should be using High Speed Steel dies. I am returning.

Nice set of dies, box keeps them organized, may only need them once but at least you will have them

Really good quality

The storage box the taps come in is pretty much junk. The partitions are not made to hold the taps so any time the box is moved, all the taps scatter inside. The latches are not much stronger than tin foil. By the time I received the taps, the box was useless.

worked great. i had a very tight spot i was working i was able to chase the threads without having to take down a wall to replace.

Great also comes with a nice wooden case