ELEGOO Mercury Plus 2 in 1 3D Printing Wash and Cure Station V2 for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models

Im a really cheap person sometimes. I really like to spend as little money as possible to achieve the same result. Ive been using Homebrew solutions for curing resin prints for over a year now. After buying this machine it has replaced all of those things and is now my One-Stop go to product for cleaning and curing my prints. I no longer forget to pull print out from under the UV light and I no longer have issues with sticky and uncured prints. This machine is worth every penny of the $120 I spent on it. Highly recommended.

Genial, aunque para que las piezas queden sin partes blancas o manchas, dejo las piezas en remojo durante unas horas (3 masomenos) en la lavadora, luego la enciendo y lavo durante 15 minutos, finalmente curo y quedan las piezas muy bien. Si no las dejo en remojo si quedan manchas luego de curar.

It does what its supposed to. The wash function works quite well, even with a bunch of complicated parts next to each other. The curing function is effective and it only seems to take a few minutes to get a good surface cure going. However, the stir motor for the wash function makes an awfully shrill high pitched noise. I can hear it upstairs through closed doors. We can even hear it outside on our patio when its running inside. Makes it impossible to run it during any kind of quiet hours, or when you dont want to hear a constant high pitched whine throughout your home. As much as I like it otherwise, Ive been tempted to return it just because of the noise. The dogs absolutely despise it as well.

Machine worked fine when I got it. Build quality wasnt great, but was acceptable. Was easy to use. I liked leaving models on the build plate, but realized its using too much of my IPA. So switched to using the basket, but its wire frame is too large and allows models to fall through. Despite these things, I was glad I got it. After about a month, the wash no longer alternates direction. Bottom of the tub seems to be rubbing. Makes a loud grinding noise. Works in one direction though. Turn table itself works fine. I changed the IPA, took the bottom apart looking for any debris, didnt find any. Ill contact support tomorrow.

This is a great unit with a lot of awesome features. The wash and cure all-in-one definitely beats the plastic pickle jar and separate UV unit. It does get clumsy aligning pins for the UV turntable, and I have accidentally started UV mode with the wash tank installed, or spun my pieces off with the spin mode when I meant to UV cure a few times. The build plate holder and model basket are two great wash holding options.

Not a printer. Have no printer yet so not sure but seems like quality

Cleaning and curing at any time of day or night no matter the weather is awesome! Machine is quite and takes up no more room than my Mars Pro.

I had been using alcohol in a pickle jar, an ultrasonic cleaner, and a UV light designed for curing nail polish to clean and finish curing my resin prints as I had seen on YouTube. This Elegoo cleaner and UV light system works so much better to give a clean firm surface. I generally leave my prints on the build plate for washing which makes the whole cleaning process a lot less messy. The turntable and columns of UV lights allow a better final cure of more of the print surface.

The machine is really nice. I have paired it with an Elgoo Mars 2. One thing to note, that the wash tub is not the same volume as the Elgoo Mars 2, so it is possible to have prints that are too large for the was bin. Im taking a point off for the quality of the wash bin & lid. This is a very poor clone of a kitchen tupperware container. The latches are poorly formed and im certain that the retention bars will snap off sooner rather than later. Its the single largest defect in the machine.

This is the best tool Ive bought for resin printing. I saves me a lot of time and does a better job of cleaning models than I ever did. Its basically a plug and play setup. The instructions are very clear and you most likely will never need them. Its that easy to use. My one knock is that the beeper, like the Elegoo printers, is a bit loud. Im sure I can deal with it though. Very well worth the money, I hope the make a larger one soon.