TEMO Carbide Downcut Inlay Router Bit 1/32 Inch Diameter

Working as expected

I used the 1/16 downcut bits to cut mahogany and maple. The attached pictures show the mahogany, all of which was cut with the 1/16 bit. The maple was largely cut with a 1/8 bit from a different maker, but the small holes in its center were cut with this 1/16 bit. I couldnt be happier with the results. No tearout or chipping at all. I ran the bit at 18,000 RPM and 36 IPM.

Great bit, work perfect for my fine detail project on my CNC router, used slow feed and speed with perfect down-cut quality.

This is a great set of bits, perfectly graduated for inlay work. The spiral downcut leaves a beautifully smooth bottom & Plunges like butter. These are solid carbide bits and work best at high speed with a slow feed rate. I have paid $30 for a single bit, so this set is a real value.

Great Bit!!! For the money you can’t beat it. You have to be mindful of DOC and feed rates but it’s a 1/16” bit. I bought two more

This bit does what I need it to do. You must be careful to not overload the pressure when cutting.

This is my favorite bit. I use it on my CNC to cut small stuff with a great amount of detail with minimal sanding. These don’t break unless I do something dumb, like dropping them or forgetting to switch the router on...

TEMO is our go-to when we need to purchase more CNC bits. They last a long time (as long as you dont screw up and break them, user error!) They are delivered quick. I purchase their 1/8, 1/16 and 1/32.

Pleased

Junky bit. Get what you paid for, I guess.