TRUE COMPOSITES Carbon Fiber Sheet & Epoxy Resin Kit (36 x 6 + 8oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi

Bought for my son to redo his car trim inside. He loves this stuff

It hardened completely unlike other resin mix I have tried which never harden properly

I bought this kit to try on a carbon shell saddle that I cracked . The saddle is still together but a crack horizontal . It worked great ! Just follow instructions .

I like it and it is what I ordered, the only thing I don’t like is that tape around the carben sheet. I don’t see it serving any purpose.

Cracked my mtn bike down tube, sanded it down to bare carbon and did 3 layers of carbon. Wrapped tight with electrical tape, cured 2 days. All good. Sanded down the excess epoxy. It takes very little epoxy when you do this. Fabric frays easily as you handle it, be gentle and use sharp scissors. 3 coats of clear coat rattle canned on after.

Worked great to make some repairs on my carbon motorcycle fenders.

The twill came apart during installation. Kept fraying, very upset, pissed off!

The resin took days to cure at room tempature, but in the end seemed to work well. I tried mixing as instructed by both volume and by weight with similar hardening times of 3-4 days.

I used this to fix up some fairings on my motorcycle. The roll was 1’x3’ not 2’x2’ which wasn’t an issue for me but keep that in mind. If you have never used carbon fiber but feel like you can do it then your fine. Just follow the directions and give it plenty of time to cure and your good.

This product is impossible to work with. I used professional super sharp hair cutting scissors to cut small sheets of carbon fiber and they all just fall apart and shred into strips while working with it. Useless!!