Vantrue N4, N2S, X4S, N1 Pro(2023), T3 Dash Cam GPS Receiver Module Type C USB Port Adhesive Mount for Windows and Mac

If you want GPS coordinates to appear with the time/date stamp for your recordings, then you must get this mount. But even if you dont, it is soooooo worth the price. The suction cup mount receives the power cable at the top, which may not be convenient, since you have to mount the camera lower. This mount receives the power cable on its right side, much better. Also, suction cup mounts tend to fall off when the cars interior reaches 90+ degrees F (which it will very quickly in the Summer, even here in New England) whereas this has 3M double sided tape, and it is a very powerful adhesive. It will not be removed easily and will put up a fight if you try to take it out. A razor blade and solvent help with that, and the mount does come with one extra adhesive pad in case you need to move the mount.

Does the job well. Adhesion is 3M which is very high quality. Only drawback I see is that the power plugin is on right side of gps device. So power cord gets a 180 degree bend.

I bought this GPS receiver module for my Vantrue X4S dash cam and I’m very happy with it. It was easy to install and it works well with the Vantrue player software. I can see the location, speed and route of my vehicle on a map and also export the GPS data to other formats. The suction cup mount is strong and stable and the type C USB port is convenient. The GPS signal is accurate and reliable and it adds more value to my dash cam footage. I would recommend this product to anyone who wants to add GPS functionality to their Vantrue N4, N2S, X4S, N1 Pro (2023) or T3 dash cam12.

So far have not had any issues with the adhesive pad sticking. Made sure to use alcohol to clean the window prior to sticking the mount to the window.

Bought mine at the end of July (2022). At first, it was great because it was a major improvement from the poor suction cup that came with the camera. The adhesive tape seemed to have fixed the issue. BUT, a little over 6 months later, the tape is now 80% off! Mid-January 2023, about half of the lower portion was off of the spot where it was placed, like it was peeling off. Ive had to re-stick (push) the lower part in everytime and eventually tried to use some other type of tape to hold it in place. A week later, only about 20% of the adhesive is still in place. Im now worried that the camera would fall off soon, just like the original suction cup. Really disappointed. Now Ill need to either order another one (which is unavailable at the moment anyway), or have to buy a separate double sided tape to reinstall this a different way, or go back to the crappy suction cup. Did I say I was really disappointed?

I like the product.. geunuine

First Rate, Top Notch, Top Shelf, and all the other sayings do this camera system justice! It will do you justice at some point.

It is a deceiving option of VanTrue. Supposedly, VanTrue can build the unit with GPS. However, it may extend the size of the unit which may prevent it to compete with other brands in terms of styling and compact ability. The one which I hate the most is it pushes the camera lower since we need the upper portion to stick this GPS module. Next issue is the port is only available on the right, while the wiring for back camera is on the left. It complicated the wiring angles. The area around the camera is now crowded with 2 USB-C Cables. Ideally, you should provide two ports for the GPS - one is on the left and one is on right. Next, you can slim down the size or at a minimum you can reduce the diameter of the adhesion area. Well, nothing is perfect. Overall, if I have to setup this camera again, I would omit this GPS module.

Had the suction style, but it was larger and the GPS was extra. Did like the ability to move it if needed, but decided to try the adhesive style.

no issues or problems