Wireless HDMI Transmitter and Receiver Kit, Plug & Play, 2.4/5GHz Stable Streaming to Monitor/Projector/HDTV, Wireless HDMI Extender Kit for Laptop/PC/Camera/Blu-ray

In same room. Line of sight. Still huge latency issues. Junk.

I set it up between devices situated about 10m apart. Initially, I was getting no signal. When I opened our large sliding door, the signal became intermittent, and when it does work it is jumpy. The maximum range is advertised as 30 m, so I thought 10 m would work easily, but Im struggling to get a signal. When I connect the device into my TV and the transmitted into the set-top box right next to it, it works, but the picture is not great on a large device. Just wanted to point out that it does work if youre located nearby, but thats not why I bought it. I bought it for a screen 10 metres away from the set-top box, and it doesnt work. Update: I bought a 3m HDMI cable to get the receiver closer to the transmitter. I also moved the transmitter somewhere closer. Still no luck. Tech support suggested its possible to use WiFi to the signal, but this seems only to be possible if transmitting from a phone to a screen, not to transmit from a set-top box to a screen. Very disappointed in the product.

This wireless HDMI transmitter/receiver works perfectly for my needs. It includes the receiver unit (the part with the two antennas), the sender (the lollipop shaped device), and a USB power cord for each, as well as a short HDMI cable for the receiver. Using it is incredibly easy. Screw the antennas onto the receiver and point them up, as you see in the photos. Attach to your TV or projector with an HDMI cable. Plug the USB cable into it and the other end into a USB power source. Most TVs and projectors have USB ports, but if yours doesnt, plug it into a USB phone charger. Turn your TV on and select the appropriate input. Youll get an instruction screen. You probably wont need it. The transmitter and receiver are paired at the factory already. Now plug the transmitter into the HDMI port on your computer or whatever device you are using. If the power light comes on, you are good. That means the HDMI port on that device provides enough power to the transmitter. If you dont get a power light, plug the included USB power cord into the transmitter, and the other end into a USB plug. In about 10 seconds, the transmitter will connect to the receiver and your video and sound will be transmitted to the receiver. Done! I have used this approximately 90 feet from my TV and the picture and sound were still perfect. I couldnt get any further away. There is a very slight delay from transmitter to receiver (maybe half a second), so it may not be desirable for gaming. I am super happy with this setup. NOTE: The receiver also has VGA output for connecting to a monitor that does hot have an available HDMI.

Using this between laptop and projector (and sometimes the TV) and has been working impressively well - both at 1080p. Installation was a breeze. Used for watching home movies and happy with the performance.

I got this device to produce a beautiful image on my big screen TV, but it has a long lag time, and it shuts down the audio on my computer and does not transmit sound to the TV. Im pretty sure this has something to do with HDMI standards that prevent conversion of music. I have to admit a bad mistake - having seen other such devices like the Chromecast, I assumed the little dongle was the receiver that goes to the TV, so I thought this device was DOA - but it was my mistake. Im looking for more support.

I have a 360 photo booth that I use at events - I needed a way to show the camera view on a big screen, so I attached this to the cameras HDMI output, plugged the power into a battery pack, and have the receiver on a projector. Problem solved! The receiver is within 20 feet of the transmitter, so theres no issues. Works as easy as plug and play!

This transmitter description can be a bit confusing at times, Ive seen it listed as handling 4k and then in other places listed at 1080p only. Im using it on a 1080p screen so thats what Ill be covering here. Im a teacher at a school with an overhead projector way up high in the ceiling. They havent run any long hdmi cables through to a wall outlet, only VGA, and I needed to move the computer away from where the VGA outlet was. My solution was to try one of these out so I could leave the receiver on top of the projector and not have to have any messy cable runs down the center of my computer lab. Now, the kind of stuff I use the projector for are videos and still shots and I just use it to duplicate what I see on my monitor. In that circumstance, under those conditions, its pretty handy. Its a little annoying that it cant just be powered over HDMI alone, but both the projector and computer have USB ports, so powering the transmitter and receiver isnt that big of a deal, it just adds another short wire to the mix. The input delay is noticeable so youd never want to use this thing as a primary display method and forget trying to play a real time game or anything with this as your only video output. But for websites, still shots, and video playback it works great and does exactly what I needed it to. Another thing to be aware of is that this device only transmits at 30 frames per second. Its a little pricey for the performance you get out of it, but it definitely solved a problem I had and most of these transmitter/receiver packages are in the same price range of around $80 to $150. This one goes for $130 as do ones with a similar feature set. So, in the end, if you have a very specific need like I did, this could work out well for you. If youre just looking to transmit from one device way across the room to a TV and need it for something like real time interaction with a game, youll want to look for a different solution.

I am using this to stream video to my projector and it has been working great with no issues. Easy to set up and use. 5 STARS

This HDMI transceiver set works great. The picture looks fine, and the set is pre-paired so setup was a breeze. The picture is a little laggy as is to be expected when transmitting it over WIFI across the room, so dont expect to be able to play games. Its fine for watching movies though. The only issue Ive found is that the transmitter can get hot, especially if it lays flat on a surface (such as might happen when attached to a laptop), so Ive taken to letting it dangle off the edge of a table to improve air flow. The engineers need to apply a little more time to thermal management, but other than that, Im happy with it.

Cool device. My old office used to have these. Basically you hook the base unit up to the television and then you plug the transmitter into your laptop. The transmitter would send the signal to the TV and the base unit, making your laptop work on the TV wirelessly. Overall it’s cool and very convenient to use