XiKe 10 Pack Blue 2 Nylon Garage Door Roller 4 Stem, Quiet/Durable and High Load, Use 6200-2RS Double Seals Precision Bearings.

So far really liking these rollers. Much quieter than the previous ones. Packaged well and performing as advertised.

My garage door is much quieter after installing these rollers. A great update to the door. Would highly recommend, especially if replacing steel rollers.

These are solid, high-quality, sealed-bearing rollers that turn smoothly and fit the brackets on standard sectional garage doors. We just got a new door opener, so figured we would replace the original, no-bearing rollers now. For the rollers install, we didnt want to unfasten the 2 lowest brackets which are under tension from the torsion springs (the other 8 rollers install easily one at a time by removing their respective brackets). YouTube videos show methods bending the vertical tracks to replace the rollers then bending them back, prying the rollers out with a claw hammer and hammering the new ones in, or just leaving the old rollers in place. We didnt want to use these methods, so devised our own as follows, using it for both sides. First, with the door open, we removed the 2 bolts at the top of the vertical door track that hold it to the mounting bracket which joins the vertical track to the curved track. Next, we removed the bolt in the middle of the vertical track and loosened (but not removed) the bolt near the bottom of this track. Now we were able to pivot the vertical track about 2 inches off of vertical toward the rear of the garage, so that the bottom opening of the curved track is open and unrestricted. Then, we released the opener trolley from the opener rail and manually lowered the door enough so that the first roller hangs just below the curved track (but doesnt enter the now displaced vertical track). Now, that roller can be easily replaced. To finish, just reverse the process: 1) push the door to fully open position while making sure the new roller enters the bottom of the curved track and engage the trolley, 3) realign the vertical and curved tracks, and 4) replace and tighten the track bolts. We alternated right and left sides as we replaced each levels roller. Simple and no need to risk damaging the tracks.

Installed these on my 15yr old garage door that had steel rollers. It is completely different. SO MUCH QUIETER (if thats even a word). 100% recommend

As advertised. Made a noticeable noise reduction to our overhead door.

These rollers are good and at a good price but it didnt help eliminate my noise. Not sure if its the shafts rubbing in the holders or what. Same squeaking but may not be the rollers.

Didnt know what to expect but they seem good quality. Very quiet compared to the old ones. Highly recommended.

So far Im happy with these rollers. Wont really know what they turn out to be for several years. They really quieted the garage doors which is what I wanted.

Easy to replace the old rollers and improved the ease of manually raising the door.

I love these rollers they super- reduced garage door noise, easy to install