8mm OD 20mm Long Light Load Compression Mould Die Spring Yellow Compression Mould Die Spring for The Ender 3s Bed 20pcs

Works great easy to install and cheap.

I replaced the springs on my Ender 3 V2 with these. They are much more stable than the ones that come standard. I have had no problems with keeping my prints level.

I used these to replace the bed springs on a new Ender 3v2 and finally got a successful print. Two in a row actually, then pretty much went back to training for my professional bed leveler status. Even with these springs, I have struggled to get the bed to stay level. Someone recommended hair spray and currently printing my 2nd consecutive successful print without leveling the bed in between. (I have ordered silicone bed levelers so I am curious to see if they are any better) Good luck and remember level the bed again

Havent leveled my E3 V2 bed in a while, these are great! Would love A 4pk option.

Just by changing the stock springs to these, the print bed has remained level for much longer. These springs are definitely something you should buy if you still have the stock springs that came with the Ender 3. Its worth the purchase and you have spare springs in case of anything happening.

Great product.

Huge upgrade over factory springs. Really help to keep the proper pressure and maintain a level bed.

Be forewarned, this product does NOT fit the Ender 3 S1 Pro, or at least what I received does NOT, they are too short, and when comparing the stock springs, and these, there is about 2-3mm height difference, DO NOT BUY FOR THE ENDER 3 S1 PRO!

Put these in a Creality ender v2. Once the bed is leveled it seldom needs a touch up, only when I remove the glass bed for a scrub down. You cannot go wrong here.

Nice and stuff compared to the stock ones and work well.