AMP Research BedStep | 75306-01A | Fits 2011 - 2019 RAM 1500; 2011 - 2018 RAM 2500/3500; 2019 - 2022 RAM 1500 Classic (Excludes Dual Exhaust & EcoDiesel Models) and other RAMs (Check Description)

So I have been using this step daily for a few months now and I am completely satisfied with it. I am 210 pounds, use it 10-20 times a day & so far i haven’t had a single issue. It only took about 15 minutes to install, raises & lowers easily. It also tucks out of the way nicely. Seems a little pricey but so far it’s been worth it.

The install was fairly easy, however the hardware to mount it to the truck was missing and I had to reuse the old bolts. Which meant I had to cut off the washers off of it and get new ones. I also didnt like the fact that I had to remove the bracket for the bumper corner brace. It seems like they would have a modified bracket in the kit. Time will tell how well I like it.

Great product. A solid step. Makes it easier to get in and out of the truck bed.

I installed this bumper step on our 2012 Ram 3500, with dual rear wheels, truck. Installation was very easy, as I had all the tools required; a torque wrench is required to ensure the four mounting bolts, and the three step bolts, are properly tightened, without being overly torqued. I took my time, double checking each step, and it took me an hour to install the step. All components seem to be made of high quality materials, are well made, and very well designed. All parts fit together perfectly. Once installed, the step is unobtrusive, yet easy to deploy and retract, with just a slight touch of ones foot. It feels solid and easily holds my weight. (I weigh just over two hundred pounds.) It doesnt shake or wobble, either stepping onto or off of it. As for its intended use, it makes getting into, and out of, the bed of our truck much, much easier, especially since it is a 3500 and the bumper, as well as the bed of the truck, are so high off the ground. I stand approximately 5 10 tall and I either had to jump onto the tailgate or roll onto it, when it was down, in order to get into the bed of the truck. Getting out of the truck required me to jump off the tailgate; eventually I was going to misjudge the landing and hurt myself. Now that the step is installed, I can easily, and safely, enter and exit the bed of the truck, as well maintain my dignity while doing so! If you are debating getting this, then you have already determined you need it, so stop stalling and get it; you wont be disappointed.

Great step! After contemplating spending the money for this, I did. Wow am I happy with it. Wish I would of bought it a long time ago! Very easy to install with basic hand tools. You have to remove one small, minor bumper bracket to make this fit, but other than that it bolts right on. Fits great,, very easy to flip down and back up. Thus step us right about the half way point between the tailgate and the ground. Makes getting into the truck bed alot easier, no more climbing or step stools now, lol. I have a 2014 Ram 3500 single wheel with the 6.7 Cummins.

Unbelievable how much easier it makes it to get into my truck bed. Like everyone else I had to step on the bumper then the tailgate to get into the bed of the truck. This bed step is about a foot below the top of my bumper so needless to say it makes it much much easier.

The manufacturer makes excellent products. They are expensive but you get quality. This step is easy to pull down with your toe. It’s rugged and stays down until you easily push it back up with your toe. It stays up and will not fall back down. I had a bit of a challenge installing it because mine was a custom application that they didn’t make brackets for but it worked out well.

This is a great product, our new truck was so high that we had to find something to make getting into the bed of the truck easier. It came in a timely fashion. Was a breeze to install. And we have had several people asking us where we got it. Simple to use. Just push down with your foot or hand. Climb in and out. Then push back up with your foot or hand.

This installed exactly as described. Not sure, but previous issues with tred mounting bolts may have been solved as they are now Allen key... no issues or concerns about stripping as others have noted A bit flimsy when you step on it, but appears to hold as expected ( tested at 215 lbs ) Cool mechanism for up /down movement and looks good installed Position allows for in/out of truck bed with gate up or down.... at 60 years old, this is a great feature for my Ram 3500

shipping was quick, product arrived on time, installation was simple. with step buy step instructions, make sure you have a 3/16 the allen wrench or socket, I only had metric so had to purchase one to complete installation. Also you will need a torque wrench to insure adequate bolt tightness or not stripping out your bumper threads. A 10mm ratcheting wrench helps also for removing triangular bumper stiffener prior to install. Very simple strait forward install, should take no more than 15 or 20 minutes if you have the correct tools.