Astro EUROHV105 EuroPro Forged HVLP Spray Gun with 1.5mm Nozzle and Plastic Cup

Well made HVLP sprayer. I got the larger tip for spaying latex. It did work, but not the ideal method for latex.

I RECEIVED A SPRAY GUN DID NOT EVEN WORK. I BOUGHT THIS GUN TWO TIMES. I DID NOT HAVE LUCK TO TRY IT. NO MORE IT JUST WASTING MY TIME.

overall pretty good hvlp for clearcoat and basecoat!

Could only get the gun to provide about a 3-4 inch fan. Had a super hard time try to obtain adequate coverage without streaking. Would not recommend.

Works good for the price

Great HVLP gun. Im not a pro, but I have a background in painting. This is a very well made, very capable and very affordable gun.

This is a great gun that I have used several times now - nothing like the cheap chinese guns that fall apart in a few hours. Works perfectly after cleaning. I advise however that you make sure to filter your paint before pouring it into the cup or you will clog the small filter at the base of the cup very quickly.I am spraying house latex paint that has been thinned with water about 30%. It will not spray unthinned latex well.

I consider myself a novice painter and I was able to lay down clear with little to no orange peel with this gun. Do hesitate to buy. I sprayed the first coat @29psi dropping down to 15psi for the next two coats.

Great Value.

I bought this to replace my eastwood low-cfm usage spray gun, figuring it was a middle ground between the HF guns and the big money ones. My main concern with the EW gun was the sub-par fan height. This one puts out a nice full 8-10 tall fan when 8 away from the piece (compared to the eastwood that is more like a 5 fan) and you dont need to move at a crawling pace to get the material down. I use this with a 60 gallon compressor, with a regulator on the output set to 80psi, and I have the small 3m regulator available on amazon mounted to the gun set to around 22psi. The guns instructions say go 29psi but it feels way too high of pressure at 29psi. I also immediately upgraded the cup to the 1000mL titan aluminum cup off amazon (you need to extra import gun adapter too). With all those pieces, you get a very nice spray gun. I have so far used it to spray 2k urethane primer and single stage enamel. I am yet to find out if this 1.5mm tip will be good with clear coat.